Irwin Junior Saw has a large contoured handle and the blade tensioning screw provides more control and better performance than a standard junior hacksaw. Size: 150mm (6in).
It has an all metal keyed chuck for maximum durability and bit retention, for added convenience it also has an on-board chuck key holder. The POWERSTATE® brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,200/min.Chuck Size: 13mm.Capacity: Wood: Auger Bits: 38mm, Self-Feed Bits: 50mm.Length: 431.8mm.Weight: 3.3kg.
The Monument Air Bag Stopper is a durable, quality flexible air bag stopper for the plugging of drains and pipes. This bag is made with a durable nylon outer casing that gives the air bag a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure. Inflate with a MON1308 pump.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3133 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 80.Pack quantity: 10.
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 160EURD has the following specifications: 60mm solid brass padlock - 30mm hardened steel shackle, 9mm diam. - 5-pins
It provides easy and comfortable handling while minimizing hand fatigue and pain. The side grip is angled at 20° for manoeuvrability and the best performance. The GA4530 is fitted with a high quality motor with excellent heat resistance. It has built in dust protection with dust proof ball bearings, the motor field is coated with protective powder varnish. Two labyrinth rings seal the bearings and machine bevelled gears from dust and dirt.
Bahco Half Round Cut File with a tapered half round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: half round bastard.Tanged.
