Makita 9920 110 Volt Belt Sander Variable Speed 76 x 610mm

The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 50 mmOverall height: 77 mmOverall depth: 18 mm Shackle width: 28 mm I.D.Shckle height: 29 mmShackle Dia: 8 mm

Bahco Bricklayers Hammer with anti-slip striking face and nail puller. Has a tubular steel shaft with comfortable grip. Weight: 600g (1.1/4 lb).

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx® compatible head of the screw enables increased torque control. Supplied complete with cover caps and Torx® compatible bit. APPLICATION:Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, TORX® compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, TORX® compatible heads were designed to prevent it and to achieve a desired torque consistently. TORX® compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 202mm Box 100

The Knipex 86 03 Series plier wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power 86 03 125: 11 Adjustments, Capacity: 23mm.86 03 150: 14 Adjustments, Capacity: 27mm. 86 03 180: 13 Adjustments, Capacity: 35mm.86 03 250: 17 Adjustments, Capacity: 46mm.86 03 300: 22 Adjustments, Capacity: 60mm.Length 180mm (7 in).Capacity 35mm (1. 3/8 inch)

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

These Thor Nylon Hammers have split cast iron head with two nylon faces fastened securely to the handle with two socket head cap screws. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear, and can be rotated for even wear.For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Diameter: 50mm (2 in).Weight: 2100g (4 1/2 lb).