Kostenlos
Unterstützung
The Britool 3/8 inch 12-point sockets (metric) are crafted from chrome vanadium steel with a high chrome finish. The OGV profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 691, ISO-1711-1.Size: 10mm Length: 25.7mmWeight: 20g
Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).
The Makita DHP459 features: Compact design with an overall length of only 192mm. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. LED Job light with pre-glow function. BLDC motor specially designed to provide, above all, more work amount on a single full battery charge.
Replacement irons (blades) are available for all Stanley block and specialist planes.All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed.All cutters are fine rotary ground to give a flat surface that is easier to sharpen.G : Denotes suitable for old style planes.To fit 112060 Plane 60. 1/2G.(old style)Size of Cutter 1.3/8in
The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm
The Armorgard SafeStor™ Hazardous Floor Cupboard is designed to be used internally for the safe storage of flammables and chemicals, such as paint and other hazardous substances as defined by COSHH guidelines. Built to a 30 minute fire resistance. Supplied with 1 spill retaining galvanised shelf, liquid-tight sump to contain spillages, flush handles with two-point locking, reinforced doors, powder coated paint finish and relevant warning signs.The Armogard SafeStor™ Hazardous Floor Cupboard has the following specifications: External Dimensions: 350 x 300 x 700mm.Internal Dimensions: 340 x 290 x 690mm.Number Of Shelves: 1.Weight: 12kg.
