Cellularline Interphone Motion Cam Mini LCD

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

AUSTINBEM Fashion Beach Swimming Hot Spring Boxers Front Zipper Pocket Beach Shorts for Men

Features
Cut and abrasion-resistant leather and microfibre uppers Hinge at the ankle area Protection of the shinbone with upper and lower anatomically shaped shin guards Shaped heel guard to make changing gears easier when starting Protection of the midfoot and toe area in plastic with ribbing for improved impact absorption TPU Insert in differentiated density in the gear change area for maximum control Burn Guard Grip in heat and wear-resistant vulcanized rubber Fastens with 4 buckles with large, new aluminium levers Shin gaiters in permeable microfibre Vibram® wear-resistant sole in shock-proof “Double Composite” rubber EN 13634:2010 certified Shock absorbing antibacterial insole with multilayered structure Inner made in 3d Mesh for optimum comfort and sweat absorption Insole made in composite plastic/steel material to guarantee greater rigidity and absorption on the foot against compression impacts Reinforced steel toe EN 13634: 2015 certified

Komfort/Ausstattungtemperaturregulierend, kühlt im Sommer optimale Atmungsaktivität nahtlos verarbeitet in 3D-Stricktechnologie (seamless) bakteriostatische Wirkung, antibakteriell und geruchsneutralisierend durch SILVERPLUS®-Ausrüstung MaterialHeld-Strechfit

Material:
Fiberglass
Features:
contain anti-scratch visor included antiturbulenter double neck protection Micrometric helmet lock high-quality multi-layer coating with UV protection quality interior Sanitized® treated Glasses loop back ECE 22 05 Weight: 900g + /-50g

Material
breathable mesh cloth
Comfort
Held Clip-in Technology
Safety
Air-Bag, certified, unfolds completely within 0,1 seconds rib protector pocket for optional
Shipping info airfreight Due to the safety regulations in the airfreight, we have to remove the gas cartridge of this article for shipping outside the European Union. Upon receipt of the product, you can use any commercially available 60cc or 100cc gas cartridge to restore the function of the airbag.