Technische Daten: Leuchtmittel: 10 W LED 700 Lumen, 6500 Kelvin Abmessungen (LxBxH): ca. 170 x 115 x 80 mm Vorschaltgerät: LED-Treiber Schutzart: IP 44 Zuleitung: - Lebensdauer: 30.000 h
Mounting the unit is both easy and quick: simply use 2 of the screws provided. There are also 2 raw plugs for mounting onto a concrete or brick wall. If mounting the unit onto wood (like a fence) then just use the screws only. 3 modes of lighting: on the back of the unit there is a sliding switch with 4 positions off. Unit off all of the time Off. Unit off all of the timeMode 1 - Motion. The light will automatically turn on in full brightness mode in darkness or at night when motion is detected. It will stay on full power as long as it continues to detect movement. The light will go off when there is no motion. Mode 2 - Dusk till Dawn + Motion. The light will come on automatically as it gets darker but only using the low light setting. If the motion sensor detects any movement then the unit will switch to full brightness as long as it continues to detect movement. it will then revert back to low light after 15-20 seconds. Mode 3 - Dusk till Dawn. The light will remain on full brightness from dusk till dawn or when the batteries run flat.Specifications High output solar panel - 5.5v / 0.55w Rechargeable 18650 Lithium Ion Battery with 2200 mah capacity (user replaceable) Protection - IP65 rated as waterproof Motion Sensor Angle - 180 Degrees Sensor Distance works approx 10m (say 30ft) away Adjustable Light Modes 1. Medium Light Mode: It will charge in the day. Auto turn on medium light in darkness or at night. The lighting time is about 8-12 hours after fully charged for 7-8 hours in the sun 2. Dim Light Sensor Mode: It will charge in the day. Auto turn on dim light in darkness or at night when no motion is detected, only 24 LED will light up. It will turn on to bright light with all LEDs on when motion is detected and last about 17-20 seconds. It will turn to dim light again when there is no motion. 3.Sensor Mode: It will charge in the day. Auto turn on bright light in darkness or at night when motion is detected and last about 17-20 seconds. The light will go off when there is no motion.Whats in the Box: 2 x 30x led solar lights (packed individually) 2 screws and 2x rawl-plugs for wood or wall mounting
Features:
Adopt 320*240 2.4 TFT color LCD display, simultaneously display parameters of CH1 and CH2.
Ability to reproduce patterns of custom waveform.
Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
Max. output frequency(sine wave) up to 15MHz/30MHz/60MHz(Optional), 266MSa/s sampling rate and 14bits vertical resolution.
Completely independent dual channels output, synchronizing operation and adjustable phase difference.
Great improvement for square wave performance, square frequency range up to 15MHz with no distortion.
60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits.
High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
Duty-cycle of each channel can be adjusted independently, the adjusting resolution is 0.1%.
Sweep function: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; forward, backward and roundtrip sweepdirections.
With pulse trains burst output function: allow the unit output 1~1048575 arbitrary pulse trains.
Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequencyrange.
-9.99V~9.99V DC offset range, offset resolution: 0.01V.
With digital signal output function, CMOS output range 0~10V.
Storage feature: can store 100 groups of parameters set by the user and extract at any time.
Counter function: with DC and AC coupling modes.
Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to output from the instrument.
Communication function: the PC can be used to control the instrument.
With output short-circuit protection: all signal output can work 60s under load short-circuit condition.
Features:
IDEAL GIFT: you are sure to surprise your families or friends if you send them this gift.
WIDE APPLICATION: it is a perfect DIY cute string light for Halloween, Xmas, festival, party, etc.
LIGHTPORTABLE: it weights only 8oz with length of 16.4ft so it is easy to carry and install it anywhere you like.
EYE CARING: it emits soft and tender light and there is a plastic pumpkin surrounding the light thus you needn't worry about flickering or eye dazzling.
RECTIFIER STABILIZER: it is equipped with a rectifier to stable the voltage which can extend the lifespan of the light.
ADDITIONAL FEMALE PLUG: there is an additional female plug at the end of the light which can connect more string lights together and you do not need to worry about not long enough.
Description:This solar power 3 LED fence light is very popular and green, energy-saving. It can be installed under the roof or fixed on the fence in your garden. Solar panel absorbs sunlight into electrical energy stored in rechargeable battery. When evening comes, the solar fence light will automatically send out light. This solar fence light gives you a good view and safety of your garden at night.Specifications:Light Source:LED BulbsPower Source:SolarSolar panels: 2V 100mAIs Bulbs Included:YesSize:12cm*6cmProtection Level:IP65Clamping width:1.2cmLighting Area: 13㎡Material: PP, ABS (white shell)+ Stainless SteelWorking Time: 8~10 Hours on by 4~8 Hours ChargeBattery: AA 600mAh 1.2V (Included)Occasion:Outdoor Garden Fence Yard Pathway and So OnFeatures:1. Brand New and High Quality2. No Wiring Needed3. 3 Bright White LED, Flashlight Grade Light4. Automatic Sensor Activates in Darkness5. OFF/ON SwitchPackage Include:1 x Light1 x Mounting Bracket 3 xSeveral Screws
