Horn Snail Compact Air horn For Car Vehicle Motorcycle Boat Bike

* securized stitching * thick and supple cow hide * high abrasion resistance synthetic fabric reinforcements on exposed areas (forearms and knees) | Article: Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL | Article: Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL, black-yellow, Size 3XL

Outer material
Softshell Palmskin goatskin
Membrane
Waterproof & breathable membrane
Insulating Material
Padded lining 110 g Comfort lining Polyform
Protectors
Reinforcement with insertion tray Reinforcement of the palm
Comfort
Double adjustable wrist reflective Sensor system Long cuffs

Features:-Super high brightness.-Great quality and great Fitment.-Easy Install, No Installation Instruction.-Low Power Consumption, Save Your Power Supply.-The suitable design for heating elimination.-The valid lighting distance is much more longer than normal bulb.-Applying to difference light resource(Such HIGH LED Lamp).-The high performance of tight waterproof, dustproof, shock-proof, anti explosion.-Professional Installation Recommended.Specification:-Type: Fog Light-Bulb Type: LED-Lens Color: Clear-Size: 18*10*11cm/7.09*3.94*4.33in-Weight: 865g-Placement on Vehicle: Front, Right/ Left-Manufacturer Part Number: A1649060451Fitment:forCOROLLA AE100 AE101 1993-1997Notice:- Please allow 1-3CM differs due to manual measurement.- Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.Package Included:2 x Fog Light (Left+Right)Fitment:forCOROLLA AE100 AE101 1993-1997

Description:1.Fully submersible and perfectly sealed, waterproof spotlight adds a dazzle of color to your pond or fountain2.Comes with LED bulb, 180 degree direction3.Can be mounted vertically or horizontally, adjustable stand lets you point the light at different angles4.Ideal for boat5.Super bright and long-lasting. Easy to installSpecification:Output Power10WInput VoltageDC 12VLifespan50000 HoursMaterialAluminumWaterproof RateIP68Shell ColorBlackPackage Included:2 XIP68 Waterproof Underwater LED light

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Sunglasses For Big Heads One-Piece Face Thin Round glasseses