Born from the previous women s glove, Spidi Grip 2 takes all the salient features and elevates them to new standards. Designed on female morphology, as all Fit For Lady products, features silicone inserts on the fingertips to improve grip on the tank of the bike. Features Cowhide leather 0.7 mm thickness Clarino Palm Inserts in stretch fabric Knuckle protection in shock absorbing material Adjustable Velcro Closure
* 5 shell sizes / 5 EPS sizes * TriMatrix composite shell construction * Multi-layer EPS lining of different densities | Article: Bell Scout Air Check Jet Helmet, black-silver, Size S | Article: Bell Scout Air Check Jet Helmet, black-silver, Size S, black-silver, Size S
Universal handlebars, also suitable for motorcycles with hand guards Material 1200D polyester, anti-UV, compliant with ISO 4892-2 regulation, PE padding. Materials compliant with REACH regulation Other features Left / right straps with quick release buckles for easy installation Rigid insert to keep the opening open for the wrist Reflective imprints Each handlebar has two attachment points on the handlebar: 1. Exterior: direct attachment to the handlebar using straps and elastic straps 2. Inside: attachment to the handguard with straps (to adjust the position) Important note: The handlebars are supplied without accessories!
Acerbis X-Factory Ersatzgriff10 Farben Einheitsgröße Anwendung: auf Lenkern mit Innendurchmesser von 13,5 mm bis 16 mm und Außendurchmesser von 22 mm bis 28 mm
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
The Macna Vosges is the successor to the highly successful Jura jacket and is the ultimate hybrid motorcycle jacket! Why? Well, the jacket has a 3-layer system with a removable Raintex membrane and thermal lining. In this configuration you have a nice warm in the winter. Is it summer? Then remove the mebraan, thermo liner and then open the large ventilation panels on the chest, ventilation zips on the arms and on the back for a cool riding wind! Night Eye A next step has been taken in visibility for motorcyclists. The Equator Night Eye Dark features tiny glass particles on the Night Eye fabric that act as small satellite dishes and reflects the light beam back to the light source. Even though a car at a great distance, Night Eye lights up immediately as soon as the light rays of a headlight come into contact with the material. Comfix The Vosges is also equipped with the Comfix system, a collar closure that clicks like a printer but can be attracted as a band. A sturdy, precise system without the use of scratchy Velcro. Features Made of Durylon and Poly 500 3-layer system with removable Raintex membrane and thermal lining With Side Eye reflection on the chest and back you are particularly visible Air panels on the chest, air inlet in arms and air outlet on the back Safe tech CE Protection on the shoulder and elbow. CE back protector prepared Comfix Coat hanger Adjustable straps on the arm Easy cuff Back Pocket Grip strips Long and short connection runs Hot vest prepared Windcollar prepared Suitable with the macna Windcollar Jacket size S / M = wind collars S Jacket size L + = wind collars M * "brighter view" represents the night-eye effect
