Marshalltown M192 cement edger designed to give a good finish on steps and verges. Stainless steel blade with sturdy mountings. Light and easy to handle with comfortable DuraSoft® handle. Size: 250 x 100mm (10 x 4in).Straight Ends with 10mm (3/8 in) Radius.
The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.
This Faithfull rule is extruded from 50 mm wide anodised aluminium, and is clearly graduated on both edges.It also features a handy metric / imperial conversion chart on the reverse and a hanging hole for storage.Imperial and Metric markings.Length: 1m (39 in)
It has an all metal keyed chuck for maximum durability and bit retention, for added convenience it also has an on-board chuck key holder. The POWERSTATE® brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,200/min.Chuck Size: 13mm.Capacity: Wood: Auger Bits: 38mm, Self-Feed Bits: 50mm.Length: 431.8mm.Weight: 3.3kg.
The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application. Suitable for the following applications: Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing. Drilling through holes in masonry to house pipes and cables. Light chipping in brick or masonry Tile removal from kitchens and bathrooms. Small channelling in brick. Mortar and plaster removal. Some drilling in wood and steel. Specifications: Mode: Rotary, SDS Hammer, Chisel Only. Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,550/bpm 2.6 Joules. Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm, Core: 50mm. Toolholder: SDS-Plus. Weight: 2.3kg.
Bahco Combination Pliers used for both holding and cutting. The jaws are slimmer than standard products, have smoothly rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 38mm.Cutting ;Capacity: ;Piano: ;1.4mm, Hard: ;2.0mm.Weight: 252g.
