Kostenlos
Unterstützung
Carbon Fiber Gear Shift Knob Head Cover For BMW 3 Series E90 E91 E92 E93Specifications:Material: ABS PlasticColor: Carbon Fiber PatternSize:4.8x9 cmFeatures:- Carbon Fiber Style and OEM Fit- Environmentally friendly Material, Not Change Color, Not Fade, Wear Resistance, Easy to Install and Clean.- High Quality Adhesive, not leave traces after tearing off, not damage the original car.Fitment:For BMW 3 Series E90 2005-2011For BMW 3 Series E91 2005-2012For BMW 3 Series E92 2006-2013For BMW 3 Series E93 2007-2013Package Included:1x Gear Shift Knob CoverInstallation Methods:1. Clean the location of the installation with rubbing alcohol before proceeding. (Make sure to remove any grease, wax or dust etc.)2. Please ensure that the product completely fits before proceeding with installation. (Note: If there any questions or if the product does not fit properly, please contact us.)3. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature,heat installation location, and plate with a hair dryer or a heater on low setting.4. Carefully place the product in desired location and press down for about 1-2 minutes,(Note: Do not wash your car for 24-hour. The adhesive should be cured after 12-hour.)5. The installation is completed.Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual mea
FOX Racing Raptor Protektorvoller Körperschutz durch Kunststoff-Seitenplatten verstellbare Schultern für die Kompatibilität mit einem Nackenschutz Low-Profile-Design: passend unter oder über dem Hemd Schnallen bieten genaue Anpassung und unkomplizierte Entfernung Double-Layer-Bio-Schaumsystem für höchsten Tragekomfort Größeninformation:Groesse S/M: 80 bis 101cm Brustumfang Groesse L/XL: 102 bis 122cm Brustumfang
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
500 D Polyamid Gewebe mit 900 D Polyester Verstärkungen an den Sturzstellen herausnehmbare Reissa®-Membrane: 100 % wasserdicht, 100 % winddicht, atmungsaktiv herausnehmbares Thermofutter YF-Protektoren zertifiziert nach EN 1621-1 an den Knien herausnehmbarer Schaum im Hüftbereich reflektierendes 3M-Scotchlite™-Material 2 wasserdichte Cargotaschen Verbindungsreißverschluss Sicherheitsnaht
Specification:Condition: Brand New!!Model Number: B45728Product Name: Rear View Reverse CameraMaterial: ABS Plastic+MetalMain Color: BlackSize: 78*33*35mmVideo Cable Length: Approx.6MPower Cable Length: Approx.1.5MLens Angle: 170Resolution: 520 TV LinesTV System: NTSCWater-proof: IP67Resolution: 648*480Power: 5WPower Supply Voltage: DC12VSeismic Strength: StrongDisplay: Ntsc/PalImage Sensor: PC7070K UpgradeQuantity: 1setFitment:For VW Tiguan 2008 - 2014For VW Golf Mk4 Estate Variant Only | 1999 - 2006For VW Bora 1998 - 2005For VW Polo 2005 - 2009For VW Passat 1996 - 2005For VW Jetta 2005 - 2010For Porsche Cayenne 2004 - 2010For Skoda Fabia 2000 - 2014For Skoda Yeti( Please Compare With Your Original One Before Purchasing!)Features:-Water Resistant,Dust Proof,Shockproof.-Wide Angle View,High Definition,Night Vision.-Easy To Install.Package Includes:1 x RearView Colour Camera1 x 6m Video Cable1 x 1.5m Power Cable1 x User Manual
