Kitchen faucet - Two Handles Two Holes Chrome / Oil-rubbed Bronze / Nickel Brushed Pull-out / shy;Pull-down Centerset Antique Kitchen Taps Lightinthebox

Stabila Spirit Level 2 Vial, is a smooth-ribbed box section spirit level, the ribbed profile provides extra strength preventing the profile from bending. This spirit level can be used to check the horizontally of overhead surfaces by turning it and its horizontal vial upside down. You can then measure precisely from underneath.1 vertical vial and 1 horizontal vial. Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m. Stabila patent. Vials that are moulded in.Stabila 80AN Level 2 Vial.Length: 1000mm (40 in).

Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges D = 9.5 mmC = 12.7 mm

The Stabila 80T Telescopic Level allows you to always have the right length of level, no matter what job you need to do. The levels are adjustable meaning there’s no need to carry around several levels any more. Simply adjust the level length by sliding out the high quality extension bar, and lock into place to fix the length. A printed metric scale allows you to easily work out inner dimensions and clearances. The top edge of the level is continuous, even when extended making it easier to mark out your measurements. Integrated anti-slip stoppers on the back edge of the level allow for a firm hold when marking against flat surfaces, the spirit level will not slip giving you a free hand to mark out or cut against the level. Stabila’s unique vial installation technology ensures the components of the spirit level are firmly bonded forever. You can trust that your spirit level will retain its accuracy for life. With 2 vials: 1 plumb and 1 horizontal, with a measurement accuracy of 0.029° = 0.5 mm/m (closed) and 0.057° = ± 1.0 mm/m (extended).The Stabila 80T Telescopic Level has the following specifications: Length: 63-105cm.

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.

E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).

The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC25 Scandinavian Butt Chisel. Blade: 25mm.Overall Length: 232mm.