IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics. Die-cast body with stove enamelled rust resistant finish. Capacity: 15 to 45mm (9/16 to 1 3/4 in).
The Ragni Professional London pattern R111 pointing trowel with hold-fast, non-slip comfort grip and ergonomic handle for day long comfort. Hardened edges for longer life, well balanced and easy to use. 3-year guarantee.
The Li-ion range delivers 430% more working capacity during the lifetime of the battery compared to Ni-Cad and is 40% lighter than NiMH. The Li-ion has minimal depletion of power during use or in storage over it's lifetime. Features: Foam cell technology. Slide on battery, firm holding with multi contacts and shock absorbing pack. It will not puncture and remains cool even in heavy use. Makita have a comprehensive range of professional Lithium-ion tools available on the market, so what ever your trade, you will be confident that you have made the best choice.
The Carpenters TC hammer is an ergonomically designed hammer, forged in one piece with an I-profile for increased durability with a vibration damping urethane plug. The shape of the striking face is right angled to the handle. The claw opening and angle give the best possible grip on the nail and it has a thin, strong claw for easy access without leaving marks, and it is rounded to prevent it tearing your trousers. The ergonomically designed handle with clear end stop is available in two sizes: L and XL.Handle size: XL.Overall weight: 720g / 26oz.
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
Dense foam roller refills for use with gloss and emulsion paints on smooth surfaces for a fine finish. For use with both mini rollers and radiator rollers.The FAIRMINI2F Mini Roller Refills have the following specifications: Pack quantity: 2. Size : 100 mm (4inch).
