Kostenlos
Unterstützung
This Ford Torino GT (1976) Diecast Model Car is Black and has working wheels and also comes in a display case. It is made by Minichamps and is 1:43 scale (approx. 12cm / 4.7in long).
This Ferrari TR61 Number 10 (Phil Hill - Le Mans Winner 1962) Resin Model Car is Red. It is made by Looksmart and is 1:18 scale (approx. 20cm / 7.9in long).
Features: With electronic compass and barometer. SP Racing F3 Flight Control With Integrated OSD for Multicopter. The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails. ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader. There MEGA328 ISP port on the back of the board, will not deadlock bootloader. Looptime up to about 2 times the previous generation based stm32F1 flight control. Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time. The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux). Tiny and lightweight. On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork. STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing. All using 2.54 interface. PDB can be more perfect combination. Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in). Dedicated output for programmable LEDs - great for orientation, racing and night flying. Battery monitoring ports for voltage and current. Sonar support for precision low-altitude hold. I2C port always powered, perfect for external sensors or always-on OLED screen. Buzzer port for audible warnings and notification. F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).
Features: VTX Output Power switchable 25, 200, 500mW Traditional button+LED control of frequency and power The output power is stable, the transmission distance is far BFCMS (BFOSD LUA Script) control via FC UART _TX Silicon wires connection with other brands FC and firmware upgradeable Video signal TX5 are ready on FFC connected with MATEK FC F405-OSD Powerful power chip, up to 27V input, output 5V/1A low ripple, low interference
Antistress Cross Shape Hand Finger Gyro Spinner
Puissance HD LW-20MG 20Kg Servo numérique étanche à couple élevé avec engrenage en métal pour RC 1/10 1/8 camion tout terrain Buggy