PB Extreme Insert-Plattform - Halfrack

Features
S.E.P. supports ideal moisture transfer quick re-drying time odourless supports the natural position of the body 1st layer of modern sportswear

EnduroGuard is compact, lightweight and highly effective at stopping mud and spray blurring your vision. It’s versatile design fits both the front and rear of the bike and is perfect for any mountain bike discipline. Manufactured from a custom thickness Polypropylene, EnduroGuard is extremely durable and offers a superb fit. Unlike other guards of this kind, EnduroGuard features SealGuard which helps prevent mud and water sitting on your fork seals helping to prolong their life and service intervals.Available in 2 sizes and 10 coloursStandard size - Fits forks from 80mm to 120mm. Ideal for 4X, Cross County and short travel trail bikes.Large size - Fits forks from 130mm to 200mm. Ideal for Gravity Enduro and Downhill bikes.Versatile design allows for front and rear fitmentSeal Guard Technology to keep seals cleanSupplied with bright white zip tiesDesign, manufactured and packaged in the UK.

The T-Missile Air Jacket Tech-Air® Compatible Jacket is a fully featured all weather sport riding jacket with a range of class-leading fit and comfort features, such as stretch zones for improved mobility, zippered air intakes and extensive mesh panels for guaranteed internal air cooling. This jacket is one in a growing number of Tech-Air® compatible leather and textile products meaning its considerable protective features can be further boosted with the addition of Alpinestars’ Tech-Air® airbag system. Construction
Multifabric shell construction with mesh panels on chest, back and sleeves for improved cooling performance Large stretch accordion panels on scapulae area for Tech-Air® compatibility and help movement and comfort on the bike Accordion on sleeves for Tech-Air® compatibility Stretch elbow accordion helps movement and comfort on the bike Stretch panels for further improve fit and feel Hook and Loop strap on waist adjustment for improved riding fit Microfiber comfort edge on collar and cuffs
Protection
Level 2 certified Bio Air shoulders and elbow protectors Dynamic Friction Shield (DFS) external dual density TPU sliders on shoulders Certification 89/686/EEC Tech-Air® race vest compatible Padded areas on front and back Chest pad and back compartments with PE padding (Alpinestars Level 1 certified Nucleon chest and Level 2 certified Nucleon back inserts available as accessory upgrade)
Features
Two zippered hand pockets Waist connection zipper allows attachment to Alpinestars riding pants Embroidery logos and direct print graphic details Low profile collar construction with 3D textured comfort fabric on inner collar lining Pre-curved sleeve construction reduces fatigue Reflective details Front inner waterproof pocket

Produktdetails Material: Hartfaser/ Kunststoff-Schrumfschlauch Durchmesser: 3,8 cm erhältlich in 2 Längen

Ein Basic, das bei einem Sportauftritt nicht fehlen darf. Der Jako Stutzenstrumpf Uni 2.0 ohne Logo rundet Dein Sportoutfit perfekt ab. Ein hoher Tragekomfort wird aufgrund von 68% Polyester und 29% Baumwolle geboten. Hinzu kommt der optimale Sitz an der Wade des Stutzenstrumpfs dank seines Anteils von 2% Elasthan und 1% Polyamid. Der Jako Stutzenstrumpf Uni 2.0 ist witterungsbeständig, schnelltrocknend und sehr pflegeleicht. Immer passend und individuell kombinierbar zu den Trikots und Hosen. Eigenschaften: Material: 60% Polyester / 30% Baumwolle / 10% ElasthanSpezielles Strickmuster sorgt für eine optimale Passform Atmungsaktiv durch Mesh-Bereiche an der Wade Komfortabler Rip-Abschluss: Bund oben zum Umschlagen, damit die Stutze nicht verrutscht

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.