5 Speed Gear Shift Knob PU Leather Black/Silver For VW Golf MK5 MK6 MK7

FXR Squadron Ladies One Piece Snow SuitFeaturing the industry-exclusive F.A.S.T.™ insulation, offering excellent warmth retention, active riding mobility and the peace-of-mind of buoyancy assistance. Face the cold and match your sled with bold color combinations and a timeless FXR® design.Features:HydrX™ – 5,000mm/5,000g/m² Shell – durable 300d polyester shell with HydrX™ laminate Seam sealed in critical areas Lining – mesh/fleece lining system Insulation – 180g combined F.A.S.T.™/FXR Thermal Flex™ insulation value FXR Dry Vent™ system - snowproof and moisture resistant side body & chest vent system Hd #8 waterproof zippers throughout Reflective screens Shock-cord adjustable collar Removable/adjustable hood Adjustable cuffs with elastane inner cuff extensions Padded knees Thermal seat/dry seat & knee inserts Adjustable suspender system Reinforced instep & drop down adjustable hem Storm cuffs with hook & loop/snap closure and front/rear boot lace retention snaps Back leg hem length adjusters

Junior riders and kids crash. Sometimes hard, and then sometimes very hard! Now there is finally a solution that will minimize the risk of a head and brain injury, and that is to get the best junior/kids helmet you can find that reduces both rotation and impact energy to your head and brain! The GPX 4.5 Injected Polymer Compound helmet offers world-class protection with 360 ? Turbine Technology. Turbines made of an energy absorbing material, are set inside the helmet. This technology has two main advantages, namely reducing rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. It also has a smaller outer shell volume, which assists in reducing rotational acceleration of the head and brain, proving that a smaller helmet shell is better. Our multi-density, V-shaped impact foam is molded directly to the outer shell, enabling us to reduce the outer shell size and still achieve the highest level of impact protection. This unbeatable combination makes all Leatt riders winners. The helmet also provides ample ventilation, another feature most of us cannot get enough of and, most importantly, these vents work even at very low speeds. So, the next time a junior rider crashes, see to it that he is properly protected! Features
Injected Polymer Compound Shell 360° Turbine Technology Reduces up to 30% of head impact at concussion level Reduces up to 40% of rotational acceleration to head and brain Reduced Outer Shell Volume A 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner Optimal Neck Brace Compatibility Maximized ventilation optimized for off-road racing and effective even at very low speeds Visor with breakaway function for rotational reduction in a crash Emergency cheek pad removal Hydration ready (with optional hands-free kit) Certified and tested: ECE 2205 or DOT Weight: ECE from 1150g
Sizes
M: 51-52 cm L: 53-54 cm

Automatischer Sicherheitsverschluss, Kinnteil mit regulierbarer Belüftung, obere Venturi-Belüftung mit Ein-Knopf-Bedienung und schnell demontierbarer Innenausstattung zur einfachen Anpassung. Das sind die Merkmale, welche den Roof BOXER V8 zu einem einzigartigen, sicheren Helm machen.ROOF entwickelt den Kult-Helm BOXER ständig weiter. Mit Doppel-Zulassung als Integral und Jet, ermöglicht nun auch die neue bi-axiale Kinnteilführung das Auf- und Zuklappen des Kinnteils bei geschlossenem Visier. Die Helmschale des 'BOXER V8' aus Composite - Material erfüllt höchste Ansprüche. Das Innenfutter aus Mikrofaserstoff ist herausnehmbar und waschbar, die Wangenpolster austauschbar. Das typische ROOF-Visier Antifog mit höchster optischer Qualität ist kratzfest und leicht getönt.Helmschale aus Glasfiber Venturibelüftung oben Kinnteil mit regulierbarer Belüftung automatischer Sicherheitsverschluss des Kinnteils beschlagfreies Visier Innenfutter herausnehmbar Wangenpolster austauschbar Schnellverschluss

Do you always find it so a fiddle to put on your textile pants over your normal trousers? Do you drive a lot of commuting? Then the Swift is for you! Thanks to its smartly positioned zipper on the side, you can easily put on the pants to protect and dry at work or at home! Features
Made of Poly 600 and R-tech Fixed Raintex membrane so you always arrive dry at your destination Safe Tech protectors on the knee Side Eye boosts your visibility in the dark

Specifications:Material: heavy metal alloySize: 75x120x150mmFeatures:-100% Brand new and high quality.-It is durable and convenient.-Simple design and easy to use.-A high efficiency air cleaner system-Easy to install,just remove your stock one and screw this on-Enhance the engine performance of your bike-Efficiently filter the glow intake air-Suitable forany types of car motorbike-Increasing inlet flow rate, and filtering air impurities-With half sphere shape honeycomb structure, straggling airflow can be distributed evenly in the six direction, to form a smooth flow of airNote:1. (IMPORTANT) No Instructions Included.Professional Installation Is Highly Recommended！2. Please check the size measurement chart carefully before making payment.3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)4. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.Packing included:1 x Air Filter

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.