Held Satu II, gloves Gore-Tex

Features
Outer shells: 3 Airfit Concept Pinlock® Maxvision New Ellip-Tec® Faceshield System Kwikwick2® liner TCT® Thermodynamical Composite Technology Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. Breath-deflector: Enhanced fog-free performance. Chin-cover: contributes to noise reduction. Closing chinstrap by double D ring. ECE 22-0 This helmet comes standard with a clear visor.
Airfit Concept Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Pinlock® Maxvision Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation – and thus fogging – from occurring even when the temperature difference between the outside and the inside of the helmet increases. Kwikwick2® LINER:Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head. New Ellip-Tec® Faceshield System Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism further improves the ease and speed of faceshield changes so unique to Scorpion. This operation can be done tool-less within 10 seconds, with the shield open. Wind tunnel designed to minimize wind noise at high speed, fitted with even more powerful springs to ensure optimum fit of the shield against the seal through the compression force, fully sealed and quieter, ELLIP TEC is also stronger to keep the shield in place in the event of a fall. TCT® Thermodynamical Composite Technology Extremely light, having reduced the weight of the new Exo-1000 Air by nearly 250 g, the new TCT® structure provides a level of protection as yet unseen in the world of helmets. This smart shell is able to gradually crumple on impact, which allows it to absorb most of the energy generated by the shock, while retaining one of the strongest structures.

Description:1.LED lamp lighting without delay, does not affect the car function.2.low power consumption3.Suits to all kinds of cars4.Flexible strips5.Multicolor -15 colorsSpecification:Cover type: PVC pipeLight source type: RGB 5050Applicable models: general purposeCurrent: 0.9AVoltage: 12VPower: 50WService life: 30000 hoursLight flux: 300LMMaterial:PlasticPackage Included:10 X RGB 10CM 3SMD lamp bar1 X Voice Controller1 X ABC Remote Control1 X Shape Remote Controller1 X Color Box1 X Battery(build-in)

Outer material
Softshell Palmskin goatskin
Membrane
Waterproof & breathable membrane
Insulating Material
Padded lining 110 g Comfort lining Polyform
Protectors
Reinforcement with insertion tray Reinforcement of the palm
Comfort
Double adjustable wrist reflective Sensor system Long cuffs

Specification:Material: MetalColor: SilverSize: Approx. 2x4x11.3mm/ 0.08x0.16x0.44Made of hard metal, these kind of tire stud screws are strong and durable in use.It has a low ground pressure and it is environmentally with minimum impact.It is easy to install with certain drill and can match well with your vehicle tires.Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread.This kind of screws are suitable for most of tires and add ultimate off-road capacity to your ordinary car, truck,motorcycles,etc. It brings a good anti-slip property for your tires.Installation:1. Drill (using a very small bit) down from the center of chosen knob into the tire.2. Drill a screw up from inside to out. If the angle isnt perpendicular to the tire, it will stick out one side or the other.Do one hole and screw at a time.3. Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two layers of tape.Package Included:100 X Tire Stud Screws

Outer shell:
breathable Lycra mesh panels (80% nylon, 20% elasthane)
Lining:
3D comfort foam (100% polyester)
Fit / Features:
DIN 1621-2 certified anatomically shaped, flexible back protection body-hugging waist belt with wide Velcro closure adjustable diagonal belts V-shaped design for excellent shoulder protection removable protector washable detachable shoulder strap
Protection:
SAS-TEC® 3D protection

Features
Double spoiler with incorporated air extractors: optimization of the aerodynamic trail and internal cooling "SHARK skin" peak side fastenings: passive reduction of aerodynamic noise Autoseal system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold) Constructed from multiaxial glass fiber Integrated UV380 lable & anti-scratch sun visor Anti-scratch visor Prepared for Pinlock Max Vision Double D-ring strap Quick release visor system Optimal comfort for the persons wearing glasses Planned location for SHARKTOOTH® 1390g