Kostenlos
Unterstützung
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
The Racecraft represents our commitment to create an enhanced user experience, by providing racers with a higher level of functionality and accurate vision. The synthesis of precision engineering and minimalistic design results in a premium goggle that performs as great as it looks. Features
Outriggers: Helping to achieve perfect fit and balance. Removable nose guard: The attachment of the nose guard ensures stability and protection in the most testing conditions. Lens: Anti-fog coated Lexan lens for flawless vision. Shares the same lens shape across the product line. Lens attachment: 9 pin lens retention system. The highest number of retention points in the industry ensures a secure fit. Strap: 45mm wide, Silicon coated strap eliminates slippage. Air intakes: Patent pending technology channels air into the foam, aiding in moisture management. In the box: stack of standard tear-off s and a sublimated microfiber bag.
Kurzinfo: JVC KS-DR3004 - Auto - Verstärker - extern - 4-Kanal - 800 Watt x 2 Gruppe Audio für das Auto Hersteller JVC Hersteller Art. Nr. KS-DR3004 Modell KS-DR3004 EAN/UPC 4975769435454 Produktbeschreibung: JVC KS-DR3004 - Auto - Verstärker - extern Produkttyp Verstärker Abmessungen (Breite x Tiefe x Höhe) 32.2 cm x 18.5 cm x 5.2 cm Gewicht 2.1 kg Formfaktor Extern Verstärker 4-Kanal Max. Ausgabeleistung / Kanalzahl 800 Watt x 2 Verstärkerklasse Klasse AB Einzelheiten der Verstärkerausgabe 60 Watt - 4 Ohm - 20 - 20000 Hz - THD 90 Watt - 2 Ohm - 20 - 20000 Hz - THD 180 Watt - 4 Ohm THD Ausführliche Details Allgemein Produkttyp Verstärker Empfohlene Verwendung Auto Formfaktor Extern Breite 32.2 cm Tiefe 18.5 cm Höhe 5.2 cm Gewicht 2.1 kg Audiosystem Frequenzgang 5 - 50000 Hz Verhältnis Signal zu Rauschen 80 dB Max. Ausgabeleistung / Kanalzahl 800 Watt x 2 Kontinuierliche Leistung / Kanalzahl 60 Watt x 4 Verstärkerausgang 4-Kanal High Level-Eingänge Ja Eingangssignalspannung 0.2 - 15V Crossover
Kurzinfo: Star - Netzteil - Pkw - für Star SM-S220, S220i-DB40, T300, T300-DB50, T300-DW50, T300I-DB50, T400i-DB50 Gruppe Netzgeräte & Batterien/Akkus Hersteller Star Micronics Hersteller Art. Nr. 39569360 Modell Star EAN/UPC Produktbeschreibung: Star Netzteil - Pkw Produkttyp Netzteil - Pkw Entwickelt für Star SM-S220i, SM-S220i-DB40, SM-T300, SM-T300-DB50, SM-T300-DW50, SM-T300i, SM-T300I-DB50, SM-T400i-DB50 Ausführliche Details Allgemein Produkttyp Netzteil - Pkw Stromversorgungsgerät Eingabeanschluss/-anschlüsse 1 x Auto-Zigarettenanzünder Merkmale Aufgespult Verschiedenes Enthaltene Kabel Stromkabel - integriert Informationen zur Kompatibilität Entwickelt für Star SM-S220i, SM-S220i-DB40, SM-T300, SM-T300-DB50, SM-T300-DW50, SM-T300i, SM-T300I-DB50, SM-T400i-DB50
Precision fit and advanced technology Just1 helmet was developed and designed with the primary goals of creating the safest and most comfortable motocross helmet for a rider. Perfect fit is the essential element in helmet performance. The finest and technically advanced materials are used in the production of Just1 helmets. The external shell is made of full carbon fiber. This makes the helmet extremely rigid and incredibly light weight. Just1 has two exterior shell sizes ensuring proper fit to weight ratio for safety and stability. Features
2 sizes external shell full Carbon fiber high rigidity Anatomical structure with the exclusive “N.B.F.F.” system (Neck Brace Front Fit) Removable and washable inner lining, highly breathable fabrics and hygienically treated Removable cheek pads with the “J.1.E.R.” (JUST 1 Emergency Remove) Inside chin guard with air vents Protective internal polystyrene foam shell with air channels Multiple air vents with anti-intrusion aluminum nets Multiple top and rear air extractors Adjustable peak with air vents Double-D retention system ECE Homologation Helmet weight from 1100 GR. +/- 50 GR
Air Tech Ventilation is essential. With mouth and eyebrow massive and multiple air vents system. Just1 is designed to maximize airflow to your head. Tried and tested ventilation that allows for proper extraction of heat from the helmet. Allowing for a cooler ride in even warm weather conditions. Attention was also paid to the mental membrane integrated on the chin air vent. Which makes it less likely that rubble and flying debris could penetrate those areas. Innerlining The exclusive inner linings of the Just1 helmets are made with breathable materials that incorporate an anti microbial hygienic treatment. The liner is fully removable and washable. The liner was designed in conjuction with the clavicle flair to make the helmet easy to put on. It allows the user to focus closely on the fit of the crown portion of the helmet first.
Bluetooth Unterst¨¹tzt Das Autoradio hat Bluetooth-Funktion, unterst¨¹tzt die H?nde frei Anrufe k?nnen Sie Musik Abspielen und Anrufe empfangen, nachdem Sie Ihr Telefon ¨¹ber Bluetooth .ES ist sehr bequem und sicher zu fahren . Unterst¨¹tzung von USB - /SD-Karte zu Spielen Unterst¨¹tzung der Wiedergabe von riesigen USB - /SD-Speicher-Ausr¨¹stung, dar¨¹ber hinaus unterst¨¹tzen Sie die Aufladung aller Arten von digitalen Produkten mit USB-Schnittstellen. FM-Radio-Funktion FM-radio mit high-quality digital stereo, kann die Suche nach Kanal im voll - automatischen Weg, k?nnen preset-18 Radiostationen (Radio-Frequenz: 87.5-107.9 MHz). AUX-Funktion Unterst¨¹tzung externer AUX (3,5-mm-Stecker) zur Ausgabe in den audio-wie navigation, MP3, MP4, MP5, Mobiltelefon, audio und so weiter.
