Kostenlos
Unterstützung
A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 24 x 27mm.Length 263mm
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.The TENM380520 Hex Socket has the following specifications: Size: 20mm. Overall length: 29mm.
Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 6.4mm (1/4 in)Length: 100mm (4 in)
Teng Tools impact sockets are specifically designed for use with power tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality.The sockets have a 1/2 inch drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.The TEN920519 Impact Socket has the following specifications:Length: 38mm.Size: 19mm.
Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).Crown (mm) 10.0 Length 6 SKU STCR501906E Finish GALV Point CP Description STCR5019 STAPLE 6MM GALV 5M Qty per box 5000
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.