Modeka X-Renegade, textile jacket women

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Helmet Technology
Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 40 36 32 28 24 20

Comfort Liner Thickness (mm) 12 10 8 10 8 6

Feature:Easily grabbed for changing gears and improves the style of your vehicle.Direct replacement of the original knob, no modification needed so long as thread size matches.Instruction manual is not included.Installation:Step1: Remove the original factory gear knob from shifter.Step2: Place the new knob over the shifter and fasten the correct nut.Step3: Make sure the knob is firmly attached.Specification:Material: Laser cut acrylic plasticColor: Red+white/ blue+purpleLength: 15cmAdapter size: M8x23mm M10x23mmFitment: Universal fit for most vehiclesPackage Included:1 X Shift Knob2 X Threaded Adapter

Visier passend für:Bandit XXR Bandit SS Bandit Crystal Bandit RX8 Superstreet II

CarWindscreen Washer BottleMotor Male Plug NewFor Nissan Navara D22 Ute 1997-2012Specification:-Type: Washer Bottle-Color:White-Manufacturer Part Number:W01-77719105-0Feature:-Windscreen washer bottle assembly with narrow plug type.-Direct Replacement Bottle with cap.-Excellent Fitment and Quality.-Correct Connector No cutting or splicing.-Strict quality control standards to Build and test.*Instruction Not Included, Professional Installation Is Highly Recommended.*Fitment:For Nissan Navara D22 Ute 1997-2012Note:-Please allow 1-3mm differs due to manual measurement.-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.Package Included:1x Windscreen Washer BottleFitment:For Nissan Navara D22 Ute 1997-2012

Description:For Metasto Pump Eberspacher Diesel Hand Warmer Truck Fuel Pump Lid Holder HousingSpecification:Material: PVC EnvironmentFor metasto pump Eberspacher diesel hand warmer truckNote:1.The product does not include the pump.2.2.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.3.The colors may have different as the difference display, please understand.Package Included:1 x fuel pump lid holder housing(not include the pump)