Double Shower Faucet Systerm Contemporary Oil-rubbed Black Centerset Ceramic Valve Bath Shower Mixer Taps / Brass / Two Handles Two Holes

Our SIP rechargeable inspection lamp is perfect for the automotive industry.

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 6XAdjustment . 120 - 150mmAdjustment. 4.3/4 - 5.7/8in

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

The Rawplug Frame Fixings for fixing timber or metal window and door frames to concrete, stone, brick or blockwork. Quick and easy to use, no marking out, drill straight through frame. Anti rotation lugs prevent rotation of fixing during tightening. Tough nylon sleeve prevents frame distortion during tightening.Size. 10 x 160mm.Maximum Fixture Thickness: 110mmQty. 50.Complete with Screws

These Knipex high-quality flat nose pliers are made from fibreglass-reinforced plastic, which is fully insulated and provides protection against bridging for working on live parts up to AC 1000V and DC 1500V. These solid pliers also do not act on magnetic fields and are fully spark-free. They are ideal for meter assembly and meter blocking. In addition, they are excellent for use in chemically aggressive environments. The handles have a soft plastic zone for better grip. Performance: Conform to IEC 609DD, and DIN EN 60900.

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers three times more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more.Set of 3 Comprising:- 1 each 250mm (10 in), 175mm (7 in) and 125mm (5 in) Curved Jaw Locking Pliers.