Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 18 x 21mm Length 150mm (6 in)
The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117054B Socket 12 Point Standard 1/2 inch Drive 11mm has the following dimensions:Size: 11mmLength: 38mmWeight: 50g
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
4pcs T1 T2 Protección de las manos de seguridad Serrín Sierra de madera Empuje el conjunto de varillas para la mesa de carpintería Herramienta de carpintería
Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.
