These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat White 1.50mm Box 100
The Faithfull TCT Paint Scrapers are ideal for removing paint, varnish and other coatings from wood. Tungsten Carbide blades are extremely hardwearing and will outlast steel blades by up to 100 times. The aluminium shaft is fitted with a comfortable soft-grip handle with an internal storage compartment for spare blades.The Faithfull FAIWSTCT50 TCT Scraper has the following specifications:Blade width: 50mm.Overall length: 275mm.
The Plantpak Half Propagator Lids are suitable for use with the Half Seed Trays (PPK70200006). They are lightweight, durable and allow in maximum light whilst retaining optimum heat and humidity within the growing environment. Supplied in packs of 50.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Stahlwille Series 44 INHEX sockets have 1/4in square drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated. Manufactured to DIN 3124/ISO 2725-1 standards. Overall length: 55mm. MADE IN GERMANY.Stahlwille In-Hex Socket 1/4in Drive. Size: 7/64 AF.
Bahco ProfCut Toolbox Hardpoint Saw for medium thick materials such as timber, plywood, fibre and chipboard. Slim blade and nose for easy access. 3-side ground, super sharp GT-toothing for high cutting speed. Has a two-component handle that provides optimum user comfort. Blade Length: 380mm (15in).Teeth: 11 tpi.
The Olympia 6 piece set of 12mm bungee cords. Avaliable in 3 lengths: OLY05432: 60cm.OLY05433: 90cm.OLY05434: 120cm. Working Capacity: 12kg.Break Strength: 48kg.The Olympia Bungee Cords have the following specification: Length: 120cm.Width: 12mm.Colour: Yellow.Quantity: 6 Piece.Working Capacity: 12kg.Break Strength: 48kg.
