These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000
These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M8 Bag 100
A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.All punches boxed singly without spanner, which should be ordered separately. Size.19.0mm.Square.Spanner Operated 5/8in AF.
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
Made from unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)
The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).
