The ALM Manufacturing Metal Blades to suit various Flymo models.The ALM Manufacturing 33cm (13in) FL332 Metal Blade to suit: Flymo: Hover Compact 330, Compact 330. Compares to FLY027.
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen, and protects up to 8 years. Two coats are required. Specification: Colour : Black Finish : Hammered Size : 2.5L Coverage : 5m²/L
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nose piece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nose piece plate, swing pivot plate around then re-tighten screw.Riveter only without any rivets supplied
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
The Fisco PJ100/9 Pacer GF Tape has a 13mm PVC overcoated fibreglass blade with graduations in metric only. The impact resistant ABS frame has a handy integral ground spike, plus a tough, high impact polymer centre with low friction bearing, which offers a smooth rewind action. It has a long winding lever and easy-grip knob that makes rewinding fast and effective. It also has a corrosion resistant end-piece. Made in Britain.
The RIDGID Heavy-Duty 4 Wheel Pipe Cutter is designed for work in areas where a complete turn is impossible. Both models are equipped with four heavy-duty wheels. The 42-A Model has a short handle for use in confined areas. The 44-S Model has a second handle, making two-man leverage possible for large pipe sizes.RIDGID 42-A Heavy-Duty 4 Wheel Pipe Cutter Capacity: 20-50mm (3/4 - 2in).Weight: 3.1kg.
The Stanley FatMax Torx tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft-grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Tamperproof TorxTip Size T25Blade Length 100mm (4 in)
