Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 0 (bastard).Type: hand needle file.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600515R Ratchet Combination Spanner has the following specifications:Size: 15mm.Length: 200mm.
Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.
Stanley Roller Cabinets are designed for use in conjunction with the module system, with 3 modules fitting each drawer. They feature a central locking system for security. The drawers of the cabinets have 35mm ball bearing slides for full drawer extension, non-slip mats for the drawers are included. The cabinets have swivelling and locking wheels for manoeuvrability and security. Load capacity: 300kg. Number of drawers: 4.
The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50
ALM 4 Stroke lawnmower oil is a premium quality 4 stroke oil. It is blended from the finest mineral oil additives which ensures the thermal stability, anti-wear, engine cleanliness and corrosion protection properties demanded of a modern 4 stroke oil. It is suitable for ALL 4 stroke lawnmowers and mobile 4 stroke petrol and diesel engines using SAE30. Meets the following performance standards: API SF, API CC. Blended and bottled in the UK.Size: 500ml.
