Klim Apex Motorradjacke Schwarz S

Spidi Hydroback bag to be inserted into Hydroback-ready touring jackets.

Multi-dimensional functionality for life on the road. Supple sheepskin leather conforms for comfort, integrated plastic knuckle armor for those nasty encounters with the asphalt, and now a Touchtec leather palm to use your touchscreen devices without removal of the glove.
Convenience, Comfort, Crash-worthiness: the Icon PURSUIT TOUCH Glove has just leveled up.
Features:
ToucTec™ Leather Palm Allows You To Use Your Touchscreen Device With Your Gloves On Pittards® Sheepskin Backhand For Great Fit Integrated Knuckle Armor Secure Wrist Closure Keeps The Glove In Place Expansion Gussets To Improve Overall Flexibility Colorway is Goatskin With TouchTech Palm

Carbon Fiber K+N 48mm Air Filter For 140cc 150cc 160cc Pit Dirt Bike ScooterDescription:EasytoinstallK+Nstyleperformancejetconehighflowairfilterwith45degreeangledneckforpitbikesandmotorbikes.Fitsupgradedpitbikecarburettorsfittedtolargerenginesabove160cc.Theflexiblerubberneckcanbefittedtolargerorsmallercarburettorsastheneckwillflexupanddownby1-2mmtomaximisefitmentoptionsandincreaseairflow.The48mmdimensionreferstotheinternaldiameteroftheairfiltersneck,wherethejubileeclipislocated,andwhereitwillconnecttothecarburettor.Thisqualitygauzefilterimprovesairflowandassistsevenrunning.Manufacturedfromsteelgauzebondedontoarubbercollar.Specification:Color:CarbonFibreIncludesJubileeClip:YesIncludesCoverFixingHoleinTop:NoIncludesCovers:YesFilterElement:GauzeKNStyleNeck:BentInnerDiameterofNeck48mm/1.89OverallHeight,includingNeck:135mm/5.31WidthatWidestPoint:89mm/3.5Packagesize:88x88x125mmFitment:Modelsthatthissizeairfiltermayfitinclude:SomeHondaCB250/400models/Superdream79-85SomeKawasakimodels/GPZ305models/GPZ600RSomeSuzukiGSmodelsSomeSuzukiGSX250modelsSomeYamahamodels/XS400SOHC78-81/XS250SomeSymmodelsSomeTriumphmodels/T120BonnevilleSomelargerpitbikeenginesabove160ccwithupgradecarburettorssuchasMikuniandMolkeSomeKazumaCougar250quadbikesSomeKazuma250ccquadswithchokeleversThisitemhasbeenknowntofit:MiniMotosOtherBrands/GenericMiniMotoQuadType2MiniMotosOtherBrands/GenericMiniMotoDirtbikeOriginalMiniMotosOtherBrands/GenericRacingBike(AirCooled)MiniMotosOtherBrands/GenericMiniMotoDirtbikeCoyoteMini

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

2in1 touring jacket with big leather reinforcements Features
500 D Polyamide large leather reinforcements on crash zones 3M™ Scotchlite™ reflectors AirVent ventilation zips Humax® membrane: 100 % waterproof, 100 % windproof, breathable detachable thermo lining SAS-TEC shoulder and elbow protectors certified according to EN 1621-1:2012 (protection level 2) elbow protectors are adjustable in height upgradable with back protector SAS-TEC SC-1/12 for sizes XS - XL upgradable with back protector SAS-TEC SC-1/16 for sizes 2XL - 3XL upgradable with back protector SAS-TEC SC-1/13 for sizes 4XL - 10XL connection zip

Glove design created by FIVE, often copied but never equalled, the STUNT is considered, and rightly so, as the original of its kind. It is evolving to become the STUNT EVO and features a new design and brand new knuckle-protection shells, along with new carbon-fibre palm protection. Characterized by its leather palm, the secure snug fit, comfort, and control are outstanding thanks to its fabric topside structure. Pull-tab for easy-on/off. Perfectly suited for regular city driving. In the REPLICA version, the graphic is a fundamental element of the model. Shape adapted to the form of a woman’s hand.