Stahlwille Set Combination Spanners AF

The Knipex Pliers Wrench XL acts as pliers and a wrench in a single tool. This unique installation tool is suitable for opening widths up to 85mm (3.3/8in). It acts as an adjustable tightening tool and is ideal for large screw joints, with pressure-sensitive surfaces such as plastic, copper, brass, stainless steel and chrome. It is also excellent for gripping, holding, pressing and bending workpieces. It has smooth jaws, for damage free installation of quality union joints made from brass, red brass or stainless steel. The zero backlash jaw pressure prevents damage to edges of sensitive components. The tool allows adjustment at the touch of a button directly on the workpiece, The parallel jaws give a more solid grip. The construction gives infinite adjustment of all widths up to the specified maximum size. The pliers wrench ensures reliable catching of the hinge bolt with no unintentional shifting. The action of the jaws allows quick tightening and release of bolted connections using the ratchet principle. It has a lever transmission greater than 10:1 for strong gripping power. The pliers wrench is made from chrome vanadium electric steel, which is forged and oil-hardened. It conforms to DIN ISO 5743. Open-end wrenches with fixed opening widths are expensive, especially when used for large union joints. The KNIPEX Pliers Wrench XL, with its adjustable jaw offers enormous savings potential. Specifications: Capacity: 85mm (3.3/8in).Length: 400mm.Adjustment positions: 25.

The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18 Volt DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18 Volt DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18 Volt DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18 Volt DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18 Volt DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries. Supplied with 3 x 18 Volt 5.0Ah Li-Ion Batteries and 2 x DS300 Tough System Kit Boxes.

Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer. Size: 2.Weight 790g (1 3/4lb).Diameter 38mm (1 1/2 in).

The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50

The Milwaukee M18 VC Vacuum has a powerful 18 volt motor with a maximum air flow of 1,246 l/min and 80 bar suction power. It has a HEPA rated 99.7 % high efficiency wet/dry filter, suitable for fine dust collection. Suitable for wet and dry applications. The vacuum has a built-in blower that provides 21 l/sec of air flow for maximum efficiency. Its stackable tool box design ensures added portability and easier storage. On-board accessory and hose storage allows quick access to accessories (washable filter, hose, crevice tool and utility nozzle supplied). The M18 VC works with all 18 Volt Milwaukee® slide rail batteries - M18 B/BX, C18 B/BX, V18 B, 18 V PBS 3000. The 7.5 litre capacity reduces downtime to emptying. Naked, batteries and charger NOT included. Specifications: Voltage: 18 Volt.Max. Airflow: 1,246 l/min.Max vacuum: 80 mBar.Tank volume: 7.5 litre.Hose Size: 31.5mm x 1.8m.Blower: Yes. Weight: 5.4 kg.

Type:Faucet Light; Style:Contemporary; Finish:Plastic; Suitable Rooms:Bathroom; Features:LED; Net Weight:0.000