Kostenlos
Unterstützung
Pistola de tuercas de remache 10 "Herramienta de remachado de remachador ciego de una sola mano Herramienta de pistola de remache
50 piezas de disco de tierras raras de 9x3 mm N40 grado imán fuerte de neodimio artesanía magnética de hierro
Manguera de agua expandible para jardín Mangueras de plástico flexible Tubería Lavado de autos Riego de flores Limpieza del hogar Tubería de agua de 1.5M con junta giratoria de 360 ° / Tubería de agua de 1.5M con gancho de almacenamiento de manguera (opcional)
Quantity:1 set; Type:Cleaning Tools; Application:Bathroom; Style:Modern Contemporary,Boutique; Material:Metal,Plastic; Suitable Rooms:Kitchen,Bedroom,Living Room; Item Type:Bathroom Decoration; Features:Easy to Use,New Design; Listing Date:06/30/2022
The DEWALT DCK654P3T XR Compact TSTAK Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S