MasterLock MLKM1T x2 24mm Shackle Excell Steel 45mm Padlocks

A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 8 x 9mmLength 140mm

The Stanley Tool Basic Toolbox has an innovative design with an organiser lid for small parts storage. It is fitted with geometric lock latches that enable smooth closing and opening. The latches are made from metal and have an ergonomic design. The toolbox can be secured with a padlock (not supplied) for increased security. STST1-75515: 320 x 188 x 132mm.STST1-75518: 406 x 205 x 195mm.STST1-75521: 482 x 254 x 250mm. Stanley Tools Basic Toolbox With Organiser Top has the following specification: Dimensions: 406 x 205 x 195mm.

BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 40mmColour : Brown.Pack : Clam pack of 1000.

The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 508 Spring Divider has the following specifications: Size: 200mm (8in).

This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.Finish: Black Powder coated.

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: hand bastard.Tanged.