Kostenlos
Unterstützung
Features: Display Time, Week, Date, Month, Yearand Temperature Thermometer: shift between Centigrade temperature and Fahrenheit temperature (0C-50C, 32F-122F). Display minute hour in 12-hour or 24-hour format Chord music/natural sounds alarm. Function of snooze. Function of countdown (timing from 00: 00: 00-23: 59: 59 hours). Four natural sound songs and six chord songs for you to choose. Function of timed music appreciation. Music appreciation mode. Dynamic projection of colored starry sky accompanied with music rhythms. Backlight function.
E27 300W Soporte de lámpara de calor con base de bombilla resistente al agua
Features: Adopt industrial micro controller chip. Large LCD screen for display. Auto memory function. Fully 3-stage PWM charge management. Dual USB charge port. Build-in short-circuit protections, open-circuit protections, reverse protections and over-load protections. Dual mosfet reverse current protections and low heat productions.
Features: 52 pieces professional sewing machine presser foot kit. Suitable for most household multi-functional low shank sewing machines. Fit for Brother, Butterfly, Singer, Janome, YOKOYAM, Fanghua505A, Feiyue and many other brands. Not suitable for the old / industrial / mini / flat sewing machines. Presser feet are packed in two plastic boxes for convenient storage. A great gift for your friends and family who are sewing enthusiasts.
Produkt-Eigenschaften: Raspberry Pi 3 - Modell B Technische Daten: Broadcom BCM2387 Chipsatz 1,2 GHz Quad-Core ARM Cortex-A53 802.11 bgn Wireless LAN und Bluetooth 4.1 (Bluetooth Classic und LE) 1 GB LPDDR2 RAM 64-Bit-CPU 4 x USB-Anschl¨¹sse 4 pole Stereo-Ausgang und Composite-Video-Port In voller Gr??e HDMI 10/100-Mbps-Ethernet-Buchse BaseT CSI Kameraanschluss der Himbeere Pi Kamera zur Verbindung DSI Display-Port des Raspberry Pi-Touchscreen-Display f¨¹r den Anschluss Micro SD-Port f¨¹r Ihr Betriebssystem Laden und Speichern von Daten Micro-USB-Stromquelle Raspberry Pi 3 - Modell B Features: Jetzt 10x schneller - Broadcom BCM2387 ARM Cortex-A53 Quad-Core-Prozessor angetrieben Single Board Computer mit 1,2 GHz laufen 1 GB RAM, so dass Sie laufen jetzt gr??er und m?chtige Anwendungen Voll kompatibel HAT 40pin erweitert GPIO Ihre ?reale Welt¡° Projekte zu verbessern. Schlie?en Sie einen Raspberry Pi Kamera und Touch-Screen-Display (separat erh?ltlich) Hallo-Definition-Video-Ausgang mit 1080p-Stream und beobachten Micro SD-Slot zum Speichern von Informationen und laden Sie Ihre Betriebssysteme 10 / 100Mbps BaseT Ethernet-Buchse des Raspberry Pi mit dem Internet verbinden, schnell Produktspezifikationen: Packungsinhalt: 1 x Himbeere PI3 Modell B Brett 1 x ABS-Case 1 x 5V / 2,5A EU - Adapter Anmerkung: Rechte Stecker des Adapters geschickt nach Ihrer Lieferadresse Land w¨¹rden 1 x Micro-USB-Kabel mit Ein / Aus-Schalter 3 x Aluminium K¨¹hlk?rper 1 x-englisches Benutzerhandbuch
The cradle is designed to hold the device in landscape mode with the connections on the back of the base section to allow the charger and a 3.5mm jack to be plugged in. When the Tablet is placed in the cradle it will beep to indicate it has been connected (provided power is present) and will charge the battery. The 3.5mm jack socket allows you to connect the device to an external amplifier or other audio equipment but should NOT be used for headphone connections. This smoked plastic cradle is designed specifically for the 7.0 tablet and will hold it securely allowing it to charge and be used/viewed (power required for charging). On the rear of the base is a 30pin connector and a 3.5mm jack socket. The 30pin connector is used to charge the tablet when installed in the cradle and the 3.5mm socket allows you to connect to an amplifier or other audio device and listen to audio from it. Key Features: - With built-in 30pin connector the handset can be charged while in the cradle - Stylish smoked black cradle - Designed specifically for the 7.0 tablet - Holds device securely in place - 3.5mm socket allows you to connect to an amplifier or other audio device