Grex G6.2 K-Sport, integral helmet

Ergonomy
Neck EST adjusting control Flexible construction on joints
Material
Very strong microfibre Elastic high tenacity 6.6 Nylon, extreme abrasion resistance Goat Leather, 0.6/ 0.8 mm thick, high fitting performance Elasticized fabric Goat Leather
Safety
Palm padding Back of hand padding Side of hand padding

* Dark coloring with used look and crinkle effect * Length adjustment with single cuff and reflective edging * SAS-TEC protectors on the knee. Bag for optional hip protectors | Article: Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women | Article: Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women, blue, Size 36 for Women

Gürtel mit Metallschnalle und FOX Head Logo Branding 100% Polyurethan

Features:1. Stylish Appearance and durable.2. Made of high quality aluminium alloy material.3. Very light weight, not rust and durable.4. Easy to install. Specifications:-Placement on Vehicle: Front -Color: Blue, Silver, Red, Gold-Material: Aluminium Alloy-Outside Diameter : 3.4cm/1.34"-Internal Diameter: 2.7cm/1.06" Fitment:For Audi A4 2009-2018For Audi A5 2009-2018For Audi A6 2012-2018For Audi A7  2016-2018For Audi A8 2015-2016For Audi Q5 2009-2018For Audi Q7 2017-2018For Audi S4 2009-2018For Audi S5 2009-2018For Audi S6 2013-2018For Audi S7 2013-2018For Audi S8 2013-2018Just for reference, Pls confirm the product if it matches your car before you purchase. Package Included:1 X Start Engine Button Ring

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

5 Speed Car Gear Shift Knob PU Leather Black / Silver For VW Golf MK5 MK6 MK7Specification:Model: C01043Product Name: Gear Shift KnobColor: Black / SilverMaterial: PU LeatherSpeed: 5 Speed R12345Dimension: 113.5mmx48mm(LXW)Qty: 1pcFeatures:1.Made by excellent leather, durable;with 5 speed and black edge cap.2. Your hand can feel good while control the knob as its smooth surface and comfortable design.3.Easy and quick installation.Simply Remove your old or broken one and put on the new one.Fitments (The Compatibility Is Just For Reference. Please Compare Your Original One Before Purchasing!):For VW GOLF MK5 (2003-2009)For VW GOLF MK6 (2008-2012)For VW GOLF MK7 (2012-)For VW SCIRROCO (2008-2014)For VW JETTA (2005-2010)For VW EOS (2006-)Note:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There are no instructions included in this kit.Professional Installation Is Highly Recommended.Package Included:1 x Gear Shift Knob