The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes. Special split-point ensures easy starting and accurate drill location.
Beschreibung VDE-Rundzange Isoliert nach den VDE-Bestimmungen EN 60.900, stückgeprüft. Zulässige Spannung, unter der mit schutzisolierten Zangen gearbeitet werden kann: 1000 V Wechselspannung bzw. 1500 V Gleichspannung.Zweifarb-Mehrschicht-Isolation außen rot - innen gelb. Beschädigungen der äußeren roten Isolation werden sofort durch die darunterliegende gelbe Isolation sichtbar. Der Vorteil: einfache und jederzeit durchführbare Sicherheits-Kontrolle. Ausstattung: Rundzange, 160 mm, Sicherheits-Isolation Sicherheitswerkzeug gefertigt und geprüft nach EN 60900 = 1000 Volt. Technische Daten: Anwendungsbereich (Zangen): VDE Backenform: Gerade DIN-Norm (Schraubendreher): DIN EN 60900 EN-Norm (Schraubendreher): EN 60900 Gewicht: 140 g Material (LOV): Spezialstahl Material-Eigenschaft: verchromt Produktabmessung, Länge: 160 mm Schneidhärte: 65 HRC Zangen-Typ (Kategorisierung): Rundzange
Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-25-C Carded Size: 25mm.
This Aluminium Flat Bar is available in grade 6082 T6. A grade that is known in the metal industry as a 'structural alloy' because of its high strength combined with excellent corrosion resistance. In addition, this lightweight aluminium bar is easy to machine, drill and cut. With the right equipment it can also be welded.Popular fabrications for our flat bar include:Internal fixturesShop fittingsAutomobilesCaravansMachining partsFrame building
These Forgefix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 70 mm.Box quantity: 100.
