Kostenlos
Unterstützung
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 50-125mm (2-5 in).
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
ABUS Diskus 26 series padlocks have a pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull & manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks.'Deep Weld Technology' which offers maximum case strength. Where to use it: High security requirement in severe weather conditions The shackle is manufactured from hardened steel alloy and is protected in a stainless steel body. Key operated, key retaining (a key is needed for locking. Lock retains key until locked) The anti-cut plate provides 360 degree protection from sawing while a top quality welded seam secures against impact attack. Overall diameter: 71 mmOverall depth: 30 mm Shackle width: 19.5 mm I.D.Shackle height: 17 mmShackle Dia: 10 mm
RTR101 DIY Philadelphia pattern pointing trowels with a hardened and tempered steel blade and soft-touch handle.Soft touch handle Size 150mm (6 in).
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It has an angle tolerance ± 0.2º with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.