4 Pack 50 ml Bouteilles De Pulvérisation Fine Brume Transparent Vide En Plastique Bouteilles De Pulvérisation Rechargeable Bouteille Parfum Atomiseur Récipient pour Voyage Essentiel

Kitchen Tool 33 Cube Ice Ball Tray

The Yale Easy Fit Pet Friendly PIR Motion Detectors are suitable for connection with and to extend the Easy Fit alarm systems. They are ideally placed in the corner of any room that needs protection, such as a lounge, bedroom or extension. They are also suitable for garages and outbuildings. When the alarm is set, the infrared sensor will pick up movement and activate the siren. These motion detectors are suitable for households with pets, as they will not be triggered by a pet that weighs below 27kg. However, they are not suitable for multiple pets.This pack contains the following: 1 x PIR motion detector.4 x Wall plugs and screws.3 x 1.5V AAA alkaline cells (pre-fitted).

This Scan Hazard sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1114 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Caution Cleaning in progress'.

Birds On The Branches Print Wall Art Stickers

13L Collapsible Portable Water Buckets Camping Hiking Picnic Use Pails

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.