Held Evo-Thrux 2, gloves

Features
Fiberglass lightweight construction 2-shell construction for perfect individual fit Weight: 1050g (±50 g) Oversized vents for maximum airflow and cooling Sweat-absorbing and removable washable inner liner Height adjustable visor Fidlock® magnetic buckle for easy, single-handed fastening and release Durable multi-colored clear-coated graphics GoPro® mount included Exceeds EN1078 safety standard for bicycle Helmets and fulfills ASTM Downhill standard

The SCOTT 550 Stripes Helmet comes with a new design and is a high end helmet that pushes the limits of ventilation and safety. Equipped with the latest safety technologies such as MIPS® and Conehead and the perfect cooling management with strategically placed vents you will feel good and safe throughout your entire ride. Materials
In-Mold Technology
Features
Optimized & customisable ventilation 3D shaped foam Removable and washable liner & cheek pads
CONEHEAD™ CONEHEAD™ is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface. How Conehead TechnologyTM works ? There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head. The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head. Mips If you are seeking the best protection that money can buy then look no further. Scott helmets with integrated MIPS® brain protection system offer a whole new dimension in safety. No matter where or how you ride, choose a SCOTT helmet and Elevate Your Safety! Testing and results : taking a fall with a SCOTT MIPS® equipped helmet is very different.

A traditional helmet A helmet equipped with MIPS

Helmets are designed and optimized for straight impacts. They do not consider angled impacts. In an angled impact rotational violence is transferred to the head and the brain. MIPS is a low friction layer inside the helmet which allows the head to rotate relative to the helmet in an angled impact. This substantially reduces rotational violence and the potential for damage to the brain.

Rotational violence with a traditional helmet Rotational violence using a helmet with MIPS

How People Fall? Conventional helmets are tested by dropping them vertically onto a solid surface. They are designed to protect you from straight / radial impacts. For over 15 years, MIPS has researched how people crash in the real world. Collaborating with some of the world s leading neurosurgeons and experts, MIPS® has established that when you fall, your head most often hits the ground at an angle, creating a rotational shock to the brain. This rotational shock can cause strain in your brain. A helmet with MIPS® absorbs much of that rotational energy, offering you better protection. And if, against all the odds, you do fall vertically onto your head, a SCOTT helmet with MIPS® will protect you just as well as an ordinary helmet. MIPS imitated the brain s own protection system he Brain is suspended in a low friction cerebrospinal fluid which allows your brain to slide within your skull to protect the brain under impact. MIPS® Brain Protection System is a unique technology intended to protect your brain against angled impacts by imitating the brains natural low friction, barrier, thereby reducing the shock transmitted to your brain. Under angled impact the helmet slides on the MIPS® low friction layer minimizing the rotational violence transfered to the brain.

Der Apex ist ein Ort und einem bestimmten Zeitpunkt. Es ist ein Ort in einer Ecke wo Schräglage, Geschwindigkeit, Zugkraft und Trägheit alles perfekt ausbalanciert sind. Der schnellste und effizienteste Weg fahren führt zu beherrschen. Racer verbringen ihr Leben versucht, dieses eins, Runde um Runde zu meistern.Die Apex-Jacke wurde von diesem Laufwerk inspiriert. Design, Stil, Technik, Funktionen und Konstruktion sind in perfekte Verhältnisse integriert. Das Ergebnis: die leistungsstärksten Sport Touring Jacke jemals angeboten.Bereitstellung von Best-in-Class-aggressive/Sport-Stil, unschlagbare Wetterschutz, beeindruckende Abriebfestigkeit und komplette Auswirkungen Abdeckung, hat die Apex-Jacke alle Ecken abgedeckt.ÄUßERE MERKMALEGARANTIERT, UM SIE DRY® GORE-TEX® 3-LAYER PRO SHELL STRAPAZIERFÄHIGEM NYLON KONSTRUKTION VT10 YKK® VISLON® AQUAGARD WASSERFESTE REIßVERSCHLÜSSE PERFORIERTE ITALIENISCHE LEDER-OVERLAYS AN SCHULTERN UND ELLBOGEN 3M™ SCOTCHLITE™ GRAU REFLEKTIERENDES MATERIAL BIO-BEWEGUNGSERKENNUNG ENTWICKELT REFLEKTIERENDEN PLATZIERUNG DOUBLE FLAP STURMZENTRUM ZIP GEPRÄGTE KLIM LOGO AUF RÜCKEN INTEGRIERTE RÜSTUNG SYSTEM D3O™ T5 EVO PRO XT ELLBOGEN UND SCHULTER STÜCKE ENTHALTEN (MEHR ALS STUFE 1 CE-ZERTIFIZIERUNG FÜR PREN1621-1:2011 ZU TESTEN) D3O™ VIPER PRO RÜCKENTEIL (STUFE 2 CE ÜBERSCHREITET ZERTIFIZIERUNGSTESTS FÜR EN1621-2) EXTERNEN ARM SPANNUNG RIEMEN SICHER RÜSTUNG IN SITU MAX FLOW VENTILATION 2 AUßEN SCHRÄGE BELÜFTUNGSÖFFNUNGEN - VOM FAHRER WÄHREND DER FAHRT BEDIENBAR 2 UNTEREN ARM EINLASSDÜSEN OPTIMALE BELÜFTUNG KONFIGURATION FÜR SPORT TOURING/TOURING MOTORRÄDER MIT GRÖßEREN WINDSCHUTZSCHEIBEN FRACHT, KOMFORT UND PASSFORM-SYSTEME 6 AUßENTASCHEN [2 BRUST, 2 HAND, 1 VERDECKTE RV-BRUSTTASCHE UNTER STURMKLAPPE, 1 UNTERE ÄRMELTASCHE ID/LIZENZ] 5 INNENTASCHEN [3 MIT REIßVERSCHLUSS, 5 MESH STASH, 1 VERSTECKTE PASS POCKET IN LINER] MAßGESCHNEIDERTE SPORT FIT JACKE HOSE GÜRTELSCHLAUFEN UND JACKE, HOSE-REIßVERSCHLUSS (AUSGELEGT FÜR TORRENT HOSE INTEGRATION) AKKORDEON STRETCH LEDER PANEL OBERHALB DES ELLENBOGENS AB MITTE KRAGEN CINCH KABEL UNTEREN SAUM CINCH KABEL

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

* Abrasion-resistant: highly abrasion-resistant, single-layer motorcycle pants in cargo style * Level A * Coldblack® coating: reflects heat and UV radiation | Article: Rokker Black Jack Slim Motorcycle Textile Pants, Size 32 | Article: Rokker Black Jack Slim Motorcycle Textile Pants, Size 32, black, Size 32

The XL lens shape takes performance even further with an enhanced vertical dimension. Even when your head is subtly tilted downward, things that matter will still be in your field of view. That makes it a great choice for activities like cycling. The slightly taller design also enhances performance in sports and activities where things above need careful attention. Features
The XL edition offers enhanced lens coverage and specialized lens curvature for protection against sun, wind and impact Unobtainium® earsocks and nosepads increase grip with perspiration for a no slip grip Interchangeable Lenses let you change lenses in seconds to optimize vision in any sport environment Plutonite® Lenses offer top UV Protection filtering 100% of all UVA, UVB, UVC and harmful blue light up to 400nm O Matter™ stress-resistant frame material is both lightweight and durable for all-day comfort and protection
High Definition Optics® High Definition Optics® (HDO®) is a collection of patented technologies that allow Oakley eyewear to meet or exceed the testing standards of the American National Standards Institute for optical clarity, visual fidelity, and impact resistance.
UV Protection Eye damage attributed to ultraviolet light includes cataracts, pterygium and macular degeneration. Our Plutonite® lens material filters out 100% of all UVA, UVB, UVC and harmful blue light up to 400nm. The protection is from the lens material itself