Juego de extractor de tubo manual de herramienta de abocinado universal de 5-19 mm para herramientas de refrigeración de cono excéntrico de ángulo de cobre y latón de 3/16 a 3/4 pulgadas

These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.0 x 35mm Box 200

The Zarges K470 Aluminium Case is a high-quality aluminium universal box. The lid has a stainless steel hinge strip, two lid straps and foamed seal all round. The case has cast-aluminium stacking corners, and a high level of stability due to 3 fully-welded aluminium profile frames. Ergonomic and durable, it has C fasteners for at least 20,000 operating cycles, and profile-section joints that are fully welded. The snap fasteners can be secured with a plug lock, have lead seals, and provide protection against bursting open. They can also be sealed by a padlock (Max shackle thickness 6mm). Ergonomic handles provide comfortable handling, with loads of up to 50kg. Also has ergonomic heavy-duty sprung drop handles. The clearance dimensions are approximately 30mm less than the inside dimensions. All-round beading and corner beads give even more durability. Comes in 11 standard sizes. Customised sizes available.Zarges K470 Aluminium Case. Internal length: 550mm. Internal width: 350mm. Internal height: 150mm. External length: 600mm.External width: 400mm.External height: 180mm. Volume: 29 Litres. Weight: 4.2kg.

This chalk line has an ergonomic design, with a high impact ABS case for durability. It has an on-board hook storage, a crank which folds into case for storage and a sliding door which allows for quick and easy refill (30g. Chalk Capacity). It has a stainless steel end hook for added durability and rust prevention and can hold 30m of string. Supplied with 113g blue chalk and line level.

Designed for fitting to Record vices when holding soft or plated workpieces with highly polished surfaces to provide a firm grip without fear of damage.Special fibre more durable than lead or copper. Supplied in pairs.Size. 100mm (4 in).

Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 75mm.Pack quantity: 100.

The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 504 Spring Divider has the following specifications: Size: 100mm (4in).