FOX 360 S12, textile pants

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The new Airoh T600 has a Carbon-Kevlar outershell. The visor is Pinlock ready and weighs 1300 grams. The T600 is wind-tunnel tested and has an excellent ventilation system.
Specifications:
2 Shell Sizes Carbon and Kevlar Composite Fiber Externall Shell Wind Tunnel Tested Pinlock Ready Weight: 1300 g Visor Lock System Air ventilation System Ring Helmet Lock

Pleat PU Leather Zip Up Jacket

Cobao Car Air Outlet Phone Holder 360 Degree Rotation for 3 to 6Inch Phones AvigraphFeatures:1. Good appearance bracket install on the airoutlet.2. All metal parts have made rust prevention.3. Can rotate for 360 degree,never block your sight.4. Had pass temperature test, salt spray test and vibration test and more;5. Easy to operate and no tools needed,just use one hand can put on the phone;6. Fully enjoy your car traveling and bring more funny to your outdoor life.7. Suits all 3 to 6inch brand Phones.Specification:Brand: CobaoMaterial: High Quallity Silica GelWeight: 0.3kgStretch length: 50mm-95mmSuits for: 55cm to 90cm all brand phonesColor: Blue,Gray,YellowPackage included:1xAirOutletMount

Description:100% brand new.The rubber buttons are included with the key shell.It is a brand new 2 button remote key fob case shell cover.The fob case shell cover comes with screw and case but no blade.Sold for key refurbishment and is not intended to be a replacement part.You can use your old remote key then there is no programming requirement.Perfect replacement key shell cover,to refurbish your old key with broken button.Specification:Weight(Kg):0.01Color:BlackFitment:Citroen C1 C2 C3 C4 XSARA PicassoPeugeot 107 207 307 407 106 206 306 406Package Included:1 X Key Shell Cover

Icon Variant Pro Ascension HelmDer Variant Pro Ascension™ bietet einen lizenzfreien Mix aus Techno-Beats und Trance-Vocals. Hier gibt es keine Euro-DJs mit halbem Hemd, nur die gebrochenen Linien des prismatischen Tempos ändern sich. Nehmen Sie die BPM ein paar Klicks auf und lassen Sie Qbert sein Ding machen.Eigenschaften:Robuste Glasfaser- / Verbundschale Die mittelovale Kopfform wurde im Windkanal getestet und verfeinert Visier mit niedrigem Luftwiderstand Umfangreiche Entlüftung mit EPS-Kanälen mit hohem Durchfluss Optisch korrekter Schnellwechsel-Gesichtsschutz ohne Beschlag 5-teiliges modulares Hydradry™ feuchtigkeitstransportierendes Futter ECE 22-05 (Europa) Spezifikationen:Passform:Der Intermediate Oval-Kopf ist der am häufigsten verwendete Helmtyp und von vorne nach hinten etwas länger als von Seite zu Seite. Belüftung:8 Lufteinlässe und 2 Auslassöffnungen in Verbindung mit einer tiefen Kanalisierung des energieabsorbierenden EPS-Schaums im Innenraum sorgen für eine hervorragende Belüftung des Helms. Gewicht:Präzise Montagetechniken helfen, das Schalenprofil drastisch zu reduzieren und einen Helm herzustellen, der außergewöhnlich leicht ist. Außen:Die mit Windkanälen veredelte Schale, die in einer Fiberglas / Dyneema / Carbon-Matrix ausgeführt ist, bildet eine solide erste Verteidigungslinie. Das charakteristische Visiersystem des Variant Pro sieht nicht nur aggressiv aus, sondern trägt auch zur Verbesserung der Sicht bei, indem es dazu beiträgt, helles Sonnenlicht auszublenden und gleichzeitig minimale Auftriebseigenschaften zu erzielen. Visier:Das beschlagfreie Variant Pro™-Visier in Verbindung mit einer neu geformten Augenöffnung erhöht die periphere Sicht und erzeugt eine unvergleichliche verzerrungsfreie Sichtlinie, sodass Sie den Preis stets im Auge behalten. Innen:Das fünfteilige schweißableitende Hydradry™-Futter bietet eine größere Anzahl an Anpassungskombinationen für jede einzelne Kopfform. Kronen-, Längs- und Achternpolsterkomponenten ermöglichen die Verwendung von 27 Kombinationen in einer einzigen Schale; doppelt so hoch wie die Konkurrenz des Variant Pro. Im Lieferumfang enthalten:1x Icon Variant Pro Ascension Helm 1x klarer beschlagfreier Variant Pro Precision Optics™-Schild 1x sublimierter Hydradry™ Liner Hinweis: Wird nicht mit PSC- oder MFJ-Zertifizierungsaufklebern geliefert, es sei denn, es wurde von einem autorisierten Händler in diesem Land erworben.