Mit dem 7er der Baureihe F01 stellte BMW 2008 die neueste Version seines Spitzenmodells vor. Wieder hat der Premiumhersteller seine Limousine mit dem modernsten Zubehör auf dem neuesten Stand der Technik ausgerüstet, darunter viele Assistenzsysteme. Denn was neu und gut ist, baut BMW zuerst in sein Topmodell ein. Das Gleiche gilt für die Langversion (Typ F02) sowie die Hybridversion. Die hieß die ersten beiden Jahre nach der Einführung 2010 noch F04, später F01 LCI bzw. F02 LCI. Alle Fahrzeuge wurden optional mit Luftfederung und Niveauregulierung an der Hinterachse geliefert. Das hier angebotene Ersatzteil ist das Kompressor-Ventil für die hintere Luftfederung. Es passt auf den BMW 7er, und zwar auf die Ausführungen F01, F02 sowie F04 der Baujahre 2008 bis 2015. Die Ventileinheit ist sofort einbaufertig, ohne zusätzlich benötigte Teile. Das Kompressor-Ventil, auch Doppelventil genannt, befindet sich unten am Heck des Fahrzeuges direkt hinter der Stoßstange, auf der Luftversorgungsanlage eingebaut.
Kompressor führt über Ventile die Niveauregulierung durch
Der Kompressor dient dazu, die beiden Luftfedern an der Hinterachse mit Druckluft zu versorgen. Diese Funktion wird zum Beispiel bei der Niveauregulierung benötigt. Wenn Sie an den BMW einen Anhänger koppeln, drückt die Last auf der Anhängerkupplung das Auto hinten runter. Durch die Niveauregulierung erhöht der Kompressor dann automatisch das Luftvolumen in den Federn, sodass der Wagen weiterhin waagerecht steht. Das Kompressor-Ventil dient dazu, die Druckluft auf die beiden Federn zu verteilen und die Leitungen je nach Bedarf zu öffnen oder zu sperren.
Ein Kompressor-Ventil ist, wie jede andere Autokomponente, dem Verschleiß und der Alterung ausgesetzt. Nach jahrelangem Betrieb und Tausenden von Schaltzyklen kann es an einem Magnetventil zu einem Defekt kommen. Der Austausch des Ventils ist dann relativ günstig, verglichen mit den Kosten für einen neuen Kompressor.
Eine Ventileinheit bedient beide Luftfedern an der Hinterachse
Unser Kompressor-Magnetventil für den BMW 7er der Baureihe F01 funktioniert nach dem 2/2-Wegeventil-Prinzip. Die Ventileinheit ist ein Doppelventil. Es besteht aus 2 elektrisch gesteuerten Magnetventilen, hat 3 Druckluftanschlüsse und arbeitet in 2 Stellungen. Die Druckluftzuleitung mit dem Durchmesser von 6 mm nutzen beide Ventile gemeinsam. Die beiden 4 mm großen Ausgangsdruckluftanschlüsse verteilen die Druckluft vom Kompressor in die beiden Luftfedern. Dabei ist jede Seite farblich gekennzeichnet: Die linke Luftfeder wird vom roten und die rechte vom blauen Anschluss gespeist. Stromlos sperren die beiden Magnetventile – unter Strom gesetzt, öffnen sie.
Ersatzteil von hoher Qualität zum günstigen Preis
Mit dem AEROSUS Ventil erhalten Sie ein hochwertiges Ersatzteil in Erstausrüsterqualität. Es wurde in den Abmessungen genau für den 7er-BMW der Baureihe F01, F02 und F04 konstruiert und lässt sich dort passgenau einbauen. Hochwertige Materialien und präzise Fertigung gewährleisten ein hohes Qualitätsniveau. Alle Bauteile unterliegen ständiger Qualitätsprüfung die durch unseren Experten-Team in Deutschland zusammengestellt wurde. Regelmäßige Messungen und Prüfstands-Versuche an Stichproben aus der laufenden Produktion stellen die Einhaltung der Qualitätskriterien sicher.
Auf dieses Magnetventil erhalten Sie die gesetzliche Gewährleistung von 2 Jahren und über ein 14 Tage dauerndes Rücktrittsrecht hinaus, gewähren wir eine 30 Tage geltende Geld-zurück-Garantie auf den Kauf dieses Ventils und anderer Ersatzteile. Sie profitieren dadurch vom günstigen Online-Kauf und sind durch umfassende Rechte abgesichert.
Dieser AEROSUS Ventilblock in Erstausrüsterqualität für das Luftfederungssystem von A7 C7 4G Avant, ersetzt den Original-Ventilblock. Die Qualität, Sicherheit, Genauigkeit und Lebensdauer dieser Ventileinheit gleicht dem Original-Teil.
From 2005 to 2011, the Mercedes ML W164 series was sold very successfully. In terms of features, comfort and performance, the ML of the W164 series set the benchmark in its class. In addition to the all-wheel drive, the optional air suspension ensures the outstanding driving characteristics of the vehicles.
A Compressor Compatible with All Mercedes ML W164
Our Aerosus compressor fits all Mercedes-Benz ML-Class W164 series vehicles. The spare part can be installed immediately in the garage. After installation, the compressed air supply to the air springs and the level control are ensured again. The quality control by our team of experts in Germany ensures that you can rely on our highest quality.
The air compressor is the centrepiece of the Airmatic air suspension system by Mercedes. It provides enough pressure for all air springs, so they can carry the weight of the vehicle and cushion the bumps on the road at the same time. The compressor is also responsible for the automatic levelling. The compressed air from it ensures that the rear axle doesn't sink when the car is heavily loaded or a trailer is pulled. Because the compressor of the air springs is necessary for the proper functioning of the suspension, it's related to safety and comfort.
A Functioning Compressor is Important for Safety
A compressor like that of the Mercedes-Benz ML W164 consists of three parts. The pressure housing is used to compress the air. The drive of the compressor is a powerful electric motor. There is also an integrated air dryer. It extracts moisture from the ambient intake air before it's fed into the system.
Compressors are subject to wear as car parts that are in frequently in operation. Wear is also the main reason why the compressor of the Mercedes ML-class W164 fails. Another cause of damage to the compressor may be a leak of an air spring or other air suspension part. In this case, the compressor must compensate for continuous pressure loss in the system by continuous operation. This often leads to overheating and wetting of the dryer, and ultimately to a total failure of the compressor.
Loud Noises Signal Disturbances in the Compressor
Defects of the air suspension system are often acoustically noticeable from the compressor. If the compressor becomes loud during operation, something is definitely wrong. Another alarm sign is when the sign "Airmatic Malfunction" in the cockpit lights. In this cases, you should soon have the defective component replaced by a replacement part. Therefore, also our tip: After the replacement of the compressor, a pressure test of the air suspension must be performed. This ensures that no leakage was overlooked as the cause of the damage.
Affordable Spare Parts of the Highest Quality
If the compressor proves to be the cause of the problem, a spare part from us represents a cost-effective solution without compromising on quality and safety. The compressors for the Mercedes ML are produced in accordance with the specifications for your car. Experts from Germany monitor the quality control and ensure the car parts meet all requirements. Both the compliance with the required air pressure and the durability are regularly checked.
If you buy the compressor online, you benefit from the low cost without sacrificing quality. Your garage will remove the failed part and simply install the new compressor. Through the Internet trade you get the required component cheaper with consistently high quality.
Aerosus air springs replace the original air springs of your vehicle and offer you maximum ride comfort with high durability. Security, accuracy and quality of the product match the original part.
This brand new rear air spring fits both left and right side of Range Rover L405 vehicles.
Aerosus air springs are made of high-quality elastomer materials and covered by a 2-year limited warranty and a 30-day money-back guarantee. The rings on the air springs are crimped using a special technology for dependable operation and leak-free performance. They are known for their superior dynamic properties as well as their long life and reliable durability.
Our suspension air bags keep your vehicle level, even when carrying an uneven load. That means more effective handling and braking even in tough road and heavily loaded conditions.
Features
OE-quality air spring
Maximum ride comfort
High-quality OE-specified raw materials
Security and durability
Safe load carrying capacity and stability
Easy installation
Thousands of satisfied customers worldwide