Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 300mm (12in)Cut: half round smooth.Tanged.
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
Versión de actualización CNC 1610 GRBL Control DIY Mini máquina de grabado CNC con controlador fuera de línea con ER11 Área de trabajo 160 * 100 * 40 mm
The DEWALT Galvanised Ring Shank Nails are paper-taped for use with the DEWALT DCN692 Nailer and other popular brand first fix angled nailers. Annular rings for ultimate grip on first fix, framing applications. Galvanised finish for increased durability, suitable for indoor and outdoor use. Paper-taped for easy loading, handling and a cleaner job.
The Metabo SSW 18 LTX Power Plus Cordless Impact Wrench has a 1/2 inch drive. This Compact Impact Driver is ideal for tough applications. The high torque abilities (220Nm) of this wrench make it suitable for tightening or removing the most stubborn of rusty nuts or bolts. This Driver also features the Variospeed (V) electronics and a special 3 speed change switch which comes in particularly useful when dealing with smaller fasteners. This tool also comes equipped with the standard Metabo multifunctional monitoring system to protect both the machine and the battery pack as well as the patented air cooled technology which enables faster charging and long service life of the machine. For convenience, this wrench also comes equipped with a robust support strap for securing the machine and an integrated worklight. Supplied with 2 x 4.0Ah Li-Ion batteries, a charger and a carry case. Specification Bit Holder: 1/2in Drive.No Load Speed: 0-900/0-1,650/0-2,300/min.Impacts Per Min: 0-1500/0-2700/0-3300/min.Max Torque: 100/140/210Nm.Weight: 1.6kg.
