Stahlwille Combination Spanner 13 mm

20 Zierdeckchen "Noblesse" aus Transparentpapier mit Top-Prägung und Perlmuttlackveredelung, 13,5 cm x 8,5 cm, ca. 150 g/m², weiß.

These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range of metric sizes.Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS15 socket has the following specifications:Socket size: 15.0mm.Length: 36mm.Weight: 60g.

Bahco Bricklayers Hammer with anti-slip striking face and nail puller. Has a tubular steel shaft with comfortable grip. Weight: 600g (1.1/4 lb).

The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 300 Bag 10

Bajo de guitarra Side Dot Diapasón Marcador de posición Marcador de instrumentos de música Puntos 102 * 2mm 10pcs Blanco y 10 piezas Negro