Car Front Bumper Fog Lights with Bulb for Toyota Corola AE100 AE101 1993-1997 A1649060451

Features
Waterproof Windproof and breathable thanks to the SympaTex® Professional Klimamembrane laminated to 500 D Cordura® AirFlow ventilation system Removable inner jacket Multiple arm width adjustment Flexi-Snap collar closure Round connection tear Ergonomically adapted cut guide Three outer and two inner pockets
Safety
SaS-Tec protectors on shoulders and elbows Removable foam insert in the back Can be replaced by SaS-Tec Protector (18.0112 to size 52 / 18.0113 from size 54) Reflective elements Safety seams at relevant places
Material
2-layer laminate laminate with 500 D Cordura® and SympaTex® Net lining

Outer garment
Fibretech 600D : soft & resistant Softshell panels 3 in 1
Membrane
Removable waterproof & breathable membrane
Isolation
120 g. full removable thermo-alu lining FixeD Hardmesh lining
Protection
Adjustable approved elbow protectors Approved shoulder protectors Pocket for approved back protector
Comfort
Body fit Back ADS ventilation system Zip & velcro rubber cuff fastening Front slider Reflective material Zip for connecting with trousers Double collar neoprene 2 outer pockets 3 inner pockets Waist fastening

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

GORE-TEX® Handschuh mit Gore 2in1 Technologie von Held - höchste Taktilität, wasser-/winddicht, atmungsaktivFutterKammer 'dry' mit Pique-Push-Pull Fütterung (100% Polyester) Kammer 'breezy' ungefüttert MembraneGORE-TEX® Membrane basierend auf PTFE-Material wasser-/winddicht, atmungsaktiv Komfort/AusstattungGORE-TEX® 2in1 Technologie (1 Kammer wasserdicht, 1 Kammer ungefüttert) Klettverschluss an Handgelenk und Stulpe Visierwischer Stretchmaterial-Einsätze (100% Polyamid) auf der Oberhand Oberhand perforiert gestochene Unterhand für perfekte Atmungsaktivität und Taktilität SicherheitKnöchelschutz durch Hartplastikschale Handballen/Handkanten-Verstärkung mit SUPERFABRIC® brand material (32%Polyester, 68% Epoxidharz) 3M-SCOTCHLITE™Einsätze Innenhandverstärkung Damengrößenschwarz 01: D-6, D-7, D-8Damen kurz schwarz 01: K-D6, K-D7, K-D8Damen lang schwarz 01: L-D6, L-D7, L-D8Farbenschwarz 01schwarz-grau 03

Alpinestars Core, leather jacket

* Fit: Regular * Aramid reinforcement * stretch | Article: Overlap Carpenter Motorcycle Jeans, black, Size 36 | Article: Overlap Carpenter Motorcycle Jeans, black, Size 36, black, Size 36