Britool Combination Spanner 16mm

The Bosch BT150 Tripod is absolutely secure stance on any floor. Suitable for GPL 5 c; GCL 25; GPL 3 ; GLL 2-15; GLL 3-80 P; GLL 2-80 P; GLL 2-50; GLL 3-50; GLM 50; GLM 80; GLM 150; GLM 250 VF; GIM 60 L Professional Features: Robust aluminium design For work heights from 55 to 157 cm Functionality and precision due to circular vial 1/4" tripod thread Optimised working with line and point laser Good transportability due to low weight

SBSF series sockets 3/8in, hexagon in metric and imperial sizes.DIN 3124 / ISO 2725. 1/2in 10 DIN 3120 / ISO 1174.Finish: nickel and matt chrome-plated.Material: VANADIUM-EXTRA.With dynamic-drive profile.Size: 15mm.

The SMJ IP44 Sunset Switch detects when light levels drop below a certain amount and then activates the switch with timer. It is ideal for use with garden lights and loads upto 1400 Watt. Supplied with or without a timer.The IP44 Sunset Switch with Timer. The timer function can be adjusted from 2 to 8 hours.

The Metabo SSW 18 LTX Power Plus Cordless Impact Wrench has a 1/2 inch drive. This Compact Impact Driver is ideal for tough applications. The high torque abilities (220Nm) of this wrench make it suitable for tightening or removing the most stubborn of rusty nuts or bolts. This Driver also features the Variospeed (V) electronics and a special 3 speed change switch which comes in particularly useful when dealing with smaller fasteners. This tool also comes equipped with the standard Metabo multifunctional monitoring system to protect both the machine and the battery pack as well as the patented air cooled technology which enables faster charging and long service life of the machine. For convenience, this wrench also comes equipped with a robust support strap for securing the machine and an integrated worklight. Supplied with 2 x 4.0Ah Li-Ion batteries, a charger and a carry case. Specification Bit Holder: 1/2in Drive.No Load Speed: 0-900/0-1,650/0-2,300/min.Impacts Per Min: 0-1500/0-2700/0-3300/min.Max Torque: 100/140/210Nm.Weight: 1.6kg.

The Record Power BDS150 belt and disc sander is a very useful addition to most workshops. By changing belt or disc grits and pressure, the machine is equally at home with rapid material removal or fine finishing and moulding shapes. It is a compact belt and disc sander, equipped with an induction motor for quiet dependable performance and a cast iron base to keep the unit stable during use. It combines the two most popular types of fixed sander for all types of job applications. A tilting table is fitted to this machine, which provides for better bevels and mitres, along with an adjustable belt sander for horizontal or vertical use. Specification Input Power: 1/3 hp.Disc Speed: 2,850/min.Disc Size: 152mm (6in).Belt Size: 101mm (4in).Table Size: 225 x 158mm.Size (H x W x D): 245 x 440 x 360mm.Weight: 19kg.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.