HPE IP Console G2 Switch with Virtual Media and CAC 2x1Ex16 - KVM-Switch - 16 x KVM port(s) - 1 lokaler Benutzer - 2 IP-Benutzer - Desktop - für HPE 10XXX G2, 600, 800, Advanced Series Racks 42U 600, ProLiant DL20 Gen9, e2000 G6, Rack

The USB3S2SAT3CB USB 3.0 to SATA adapter cable lets you connect a 2.5"
SATA hard drive or solid state drive to your computer through an available
USB port -- the easiest way to upgrade the hard drive in your laptop by
adding an external SSD via USB 3.0.

The cable supports UASP, allowing for transfer speeds up to 70% faster
than conventional USB 3.0, which enables you to utilize the full potential
of your SATA III SSD/HDD, when paired with a UASP-enabled host controller.
See our UASP testing results below for further details.

This portable adapter features a lightweight design with no external
power required, for easy storage in a laptop bag or carrying case. Plus,
the cable-style adapter makes it easy to swap between hard drives without
having to install your drives into an enclosure. Perfect for easy drive
access for data migration, drive cloning and data backup applications.

The USB3S2SAT3CB is backed by a StarTech.com 2-year warranty and free
lifetime technical support.




Specification
Hardware
Bus Type: USB 3.0
Chipset ID: ASMedia - ASM1153E
Compatible Drive Types: SATA
Drive Size: 2.5in
Fan(s): No
Interface: USB 3.0
Number of Drives: 1

Performance
General Specifications: Max power of the attached drive is 900 mA
Max Drive Capacity: Currently tested with up to 2TB 5900 RPM hard drives
Type and Rate: USB 3.0 - 5 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes

Connector(s)
Drive Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors: 1 - USB Type-A (9 pin) USB 3.0 Male

Software
OS Compatibility: OS independent; No software or drivers required

32-Bit CardBus Slot für ExpressCard/34 Adapter ExpressCard wird als USB-Device erkannt. Win 2000/XP/2003/Vista/Mac OS 10.3.0 ff Hauptmerkmale Anschlüsse und Schnittstellen Eingebaut Nicht Hostschnittstelle CardBus Ausgangsschnittstelle ExpressKarte Design Produktfarbe Schwarz, Silber Systemanforderung Unterstützt Mac-Betriebssysteme Ja

Kurzinfo: Brocade SLX 9540-24S-DC-R - Switch - verwaltet - 24 x 1 Gigabit / 10 Gigabit SFP+ + 24 x 1 Gigabit Ethernet SFP+ - an Rack montierbar Gruppe Hubs & Switches Hersteller Broadcom Hersteller Art. Nr. BR-SLX-9540-24S-DC-R EAN/UPC Produktbeschreibung: Brocade SLX 9540-24S-DC-R - Switch - 48 Anschlüsse - verwaltet - an Rack montierbar Gerätetyp Switch - 48 Anschlüsse - verwaltet Gehäusetyp An Rack montierbar 1U Untertyp 10 Gigabit Ethernet Ports 24 x 1 Gigabit / 10 Gigabit SFP+ + 24 x 1 Gigabit Ethernet SFP+ Leistung Switching-Kapazität: 1,08 Tbit/s Übertragungsleistung: 720 Mpps Kapazität MAC-Adresse: 640000 Virtuelle Schnittstellen (VLANs): 4096 QoS-Hardwarewartschlangen pro Port: 8 IPv4-Routen: 256000 IPv6-Routen: 64000 Jumbo-Rahmenunterstützung 9216 Byte Routing Protocol OSPF, BGP-4, IS-IS, IGMPv2, IGMP, OSPFv2, PIM-SM, IGMPv3, OSPF for IPv6, OSPFv3, PIM-SSM, Multiprotocol BGP Remoteverwaltungsprotokoll SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS,

Features: Improve wireless coverage in all WLAN networks. Access to the Internet for computers located on the edge or outside of the range of your access point. Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards . Provides up to 300Mbps transmission rates. Support 2.4 GHz WLAN networks. Maximum WLAN security with WPA2, WPA and WEP (128/64). Software wizard for simple setup. 2dBi antennas integrated. Support Wireless Repeater Mode and Standard AP Mode. Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports. System requirments: WlAN access point/client according to IEEE 802.11n, g, b. 110 ~ 230-volt socket. The WLAN client must support at least the WPA encryption standard. WLAN access point and the WLAN client with automatic IP address assigment(DHCP). Forwarding of IPv4-based protocols/Address Resolution Protocol. The network name (SSID) of the WLAN access point must be set to "visible".

Kurzinfo: Allied Telesis AT X510-28GPX - Switch - L2+ - verwaltet - 24 x 10/100/1000 (PoE+) + 2 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ + 2 x 10 Gigabit SFP+ - an Rack montierbar - PoE+ Gruppe Hubs & Switches Hersteller Allied Telesis Hersteller Art. Nr. AT-X510-28GPX-50 Modell AT X510-28GPX EAN/UPC 0767035197869 Produktbeschreibung: Allied Telesis AT X510-28GPX - Switch - 24 Anschlüsse - verwaltet - an Rack montierbar Gerätetyp Switch - 24 Anschlüsse - L2+ - verwaltet - stapelbar Art An Rack montierbar 1U Untertyp Gigabit Ethernet Ports 24 x 10/100/1000 (PoE+) + 2 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ + 2 x 10 Gigabit SFP+ Power Over Ethernet (PoE) PoE+ PoE-Budget 740 W Leistung Switching-Kapazität : 128 Gbps Übertragungsleistung : 95.2 Mpps Mehrfachbandbreite : 40 Gbit/s Kapazität MAC-Adresse : bis zu 16.000 Virtuelle Schnittstellen (VLANs) : 4094 IPv4-Routen : bis zu 2.000 IPv6-Routen : up to 1000 Größe der MAC-Adresstabelle 16.000 Einträge Jumbo-Rahmenunterstützung

1200 Mbit / s Mesh Smart WiFi Router 2,4 GHz & 5 GHz Dualband WiFi Repeater Mesh Drahtloses WiFi System WiFi Signal Extender 3PCS EU-Stecker