Kostenlos
Unterstützung
Features: 3D printed jewelry, beautiful and fashion. Tomfeel original design, innovative and unique. Minimalist style, full of contemporary sense. Suitable to wear in a variety of indoor and outdoor occasions.
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
ACHTUNG: Bei diesem Artikel handelt es sich um einen Bundleartikel! Aktives 12\"/1\" Fullrange-Topteil mit einer Leistung von 1.200 Watt. Im Stand-Alone-Modus oder in Kombination mit den Bässen der Serie LINEAR SUB einsetzbar. Durch vier verschiedene EQ-Presets \"Bass Boost\", \"Flat (LF)\", \"Flat (HMF)\", \"Contour\" ist die Box für viele Einsatzanforderungen gerüstet und bietet bei einfachstem Handling in jeder Situation eine Top-Performance. Das START 16 BHS Set besteht aus einem UHF-Empfänger, BeltpackSender sowie einem Headset. Als perfektes Einsteigersystem ist das START 16 BHS nicht nur bedienerfreundlich durch die einfache Infrarotprogrammierung des Beltpacks ,sondern überzeugt auch durch seine Übertragungsqualität. Technische Daten Linear 3 112 FA: Hohe Endstufen-Power 1.200 W Class D bi-amped Ausgeglichener, hochauflösender Sound Hoher Schalldruck von 135 dB SPL für die Beschallung von bis zu 500 Personen (mit passenden Subwoofern L SUB 1500 A oder L SUB 1800 A) Fortschrittliche DSP-Technologie für Hi-End-Sound-Ergebnisse auch ohne PA-Spezialisten-Kenntnisse \"Intelligent Multiband Limiter\" für gleichbleibende Klangcharakteristik, egal bei welcher Lautstärke FIR-Trennung für transparente Mitten Vier verschiedene EQ-Presets \"Bass Boost\", \"Flat (LF)\", \"Flat (HMF)\", \"Contour\" für flexible Anwendungen Geringer Klirrfaktor und somit keine Ermüdungserscheinung beim Hören Einfache akustische Kontrolle des Systems auch von der Bühne aus Akkurate Ausrichtung der PA, wodurch Reflexionen an Wänden und Decken reduziert werden Max SPL peak 135 dB Halfspace (@ 10% THD) Frequenzgang +/- 3 dB 65 Hz ? 18 kHz Frequenzgang -10 dB 58 Hz ? 18 kHz Gesamtleistung 1200 W Endstufen Class D - Biamped Aktive Schutzschaltungen Undervoltage-, Thermo-, Short-Circuit-, Overcurrent-Protection, Subsonic Filter, Peak-, RMS-, Multiband-Limiter, Look Ahead Temperature Control Tief/Mitteltonlautsprecher 1x 12\" Hochtontreiber 1\" Horncharakteristik 90° x 55° CD-Horn Trennfrequenz aktiv 2,3 kHz FIR X-Over mit 72 dB/Okt. Anschlüsse 2x XLR/Klinke-Kombi In symm., 1x Stereo Cinch In, 2x XLR Thru symm., 1x XLR-Mix Out Eingangsempfindlichkeit +4 dBu @ Gain Centerclick Sensitivity-Schalter Line/Mic Input A Klangregelung 2x EQ-Schalter: Bass Boost/Flat und Flat/Contour Hochständerflansch HK Audio DuoTilt 3/7 Flugpunkte 4x M8 Griffe 2x HK Audio MultiGrip Gehäuse 16 mm MDF Frontgitter 2mm Metallgitter mit schwarzem Akustikschaumstoff Oberfläche Acryllack, schwarz Optionales Zubehör Schutzhülle, Stereo Pole Add-on M20, Speaker Stand Add-on, Neigebügel (TB-N, TB-NQ), Anschlagspunkt (AP-8), Tilt-Unit Abmessungen (BxHxT) 36 x 66 x 36,7 cm Gewicht 21,5 kg / 47,4 lbs. ANT START 16 BHS PLL Diversity UHF Wireless System: Funkmikrofon Komplettpaket inkl. Beltpack und Headset Infrarotübertragung der Einstellungen zwischen Beltpack und Empfänger FM - Diversity Funkt im \"ISM Band\" UHF 863 - 865 Mhz 16 Kanäle Headset mit Mini-XLR Anschluss Output: XLR und Klinke (Unsymmetrisch) Abmessungen: Sender/Beltpack - 64 mm x 90 mm x 23 mm; 80g Empfänger - 212 mm x 44 mm x 115 mm (Breite x Höhe x Tiefe); 400g
Austar AX007 2pcs RC coche redondo LED luz cubierta pantallas para 1/10 SCX10 D90 TRX4 modelo Crawler RC coche
Godox CB-57 sac de transport Portable avec bandoulière réglable pour Godox AD200 / AD200Pro Flash
Der DMX Controller IR RGB ist ein einfacher DMX Controller, der mit einer Infrarot-Fernbedienung bedient werden kann. Sie können DMX-Signale aufnehmen und abspielen. Für den DMX Controller IR RGB sind folgende Modi verfügbar: Manual-Modus, Automatical-Modus, DMX Signal Recording und Playback-Modus. Mit dem EEPROM kann man die laufenden Funktionen und die Parameter speichern. Der DMX Controller IR RGB ist sehr bedienungsfreundlich und zuverlässig. Dieser Lichtcontroller kann DMX bei einer max. Geschwindigkeit von 25 Frames pro Sekunde (512 Kanäle) protokollieren. Wenn diese Maximalgeschwindigkeit überschritten wird, könnte der Frame verlorengehen. Normalerweise beträgt die DMX Protokollzeit 400 Sekunden und die minimale DMX Protokollzeit 200 Sekunden. Technische Daten Stromversorgung: 9VDC / 200mA DC IN/OUT: 2pin Grün Buchse DMX IN/OUT: 3pin Grün Buchse Gehäuse: Polycarbonat Listing: CE zertifiziert Umgebungstemperatur: 0° bis +55° Lagertemperatur: -20° bis +70° Abmessungen (LxBxH): 81,7 x 15,1 x 13 mm Gewicht: 150 g
