SingleHandleKitchenFaucet,AntiqueCopperOneHolePullOutCentersetBrassKitchenFaucetwithCold Hot Mixer Hoses Lightinthebox

Herramienta de torneado de madera de torno de acero de aleación Herramienta de corte de carburo Llave Herramientas de vástago cuadrado con mango de madera Herramienta de carpintería

The Milwaukee PLH 20 SDS-Plus L Shape Hammer is a 2 mode drill - hammer drilling and rotary drilling - for maximum versatility. It has an SDS-plus chuck, with optimised hammer drilling at 5 – 12 mm. It has a forward and reverse mechanism. The PLH 20 features motor cooling airflow that is designed in a way that blows drilling debris away from the user when drilling overhead. A safety clutch protects user and machine if the drill bit jams. The drill has AVS (Anti-Vibration-System) to provide more comfortable use and less strain. The soft-grip handle and ergonomic 2-finger trigger with variable speed control increase the comfort further. Supplied in a kitbox. Specification Modes: Hammer Drilling, Rotary Drilling. Input Power: 620 Watt. No Load Speed: 0-2,700/min. Impact Rate: 0-4,400/bpm with 2.0 Joules. Capacity: Concrete: 20mm, Steel: 13mm, Wood: 30mm. Chuck: SDS-Plus. Cable Length: 4m. Weight: 1.9kg.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Type:Hand Shower; Style:Contemporary; Finish:Electroplated; Shower Width:6.5; Shower Length:22; Number of Settings:1; Spray Function:JetRainfall; Shower Hose Included:No; Slide Bar Included:No; LED Color:Blue,Green,Red; Installation Type:Wall Mounted; LED turns Blue between:32-43; LED turns Green between:0-31; LED turns Red between:50; LED begins flashing between:5-31; Shower Arm Included:No; Material:ABSPC; Features:Color Gradient,LED,Shower; Net Weight:0.000; Listing Date:05/16/2019

The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 30 mmOverall height: 50 mmOverall depth: 14 mm Shackle width: 16 mm I.D.Shackle height: 17.5 mmShackle Dia: 5 mm

Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.