John Doe Original, jeans

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

Features
85% goat leather, 10% neoprene for a high softness and comfort. External D3O protection for metacarpians. Waterproof and breathable insert Furygan ‘Dual Lining’ – the lining on the back of the hand is made from high thermicity fabrics for optimal protection against the cold, while the lining on the palm of the hand is designed to preserve the feeling of the levers. Anti-twist system. To ease fiting of the gloves even with wet hands.

Trete im Nike Magista Onda II SG für weichen Rasen noch stärker als Spielmacher hervor. Das hochwertige Kunstleder ist an den entscheidenden Stellen des Schuhs mit einer 3D-Textur (Noppen-Struktur) versehen und ergibt so eine zielgerichtete Reibung und ein präzises Ballgefühl. Der Drehbereich am Vorfuß bietet Rundumtraktion für schnelle Kehren. Bunte Farben in Volt/Total Orange/Pink Blast/Schwarz!Eigenschaften: Obermaterial: SynthetiklederInnenmaterial: Synthetikleder Material Decksohle: Schaum mit Textil-Oberfläche Material Laufsohle: TPU Sohle Dicke: 25 mm (inkl. Stollen) vorn / 35 mm (inkl. Stollen) hinten Verschluss: Schnürung Passform: Fällt normal aus Das hochwertige Kunstleder passt sich an den Fuß an und vermittelt so eine sichere PassformAn den am meisten genutzten Stellen des Fußes wurde die 3D-Textur durch Noppen verstärktDer Ferseneinsatz im Inneren umschließt den Fuß und bietet Dämpfung und eine sichere PassformDas asymmetrische Schnürsystem erhöht die BallkontrolleKonturierte, vorgestanzte EVA-Schaumstoffinnensohle für zusätzliche Dämpfung und Tragekomfort (nicht herausnehmbar)Außensohle: TPU für leichte Strapazierfähigkeit und Tragekomfort Der Drehbereich am Vorfuß eignet sich ideal für schnelle Kehren und agile SpielzügeSG-Sohle (Soft Ground): Geeignet für tiefe, natürliche Böden. Mit Schraubstollen aus Aluminium Im Lieferumfang enthalten: Ein Stollenschlüssel

Baseball Cap Classic Adjustable Plain Hat Men Women Unisex black

ADT-Advance Thermoplastic ADT-Advance Thermoplastic cover made of an injection moulded, thermoplastic resin mix with high impact resistance. Shell 2 size cover to ensure the helmet gives a perfect fit. Visor
Interior scratch-resistant polycarbonate treated visor with UV389 ray filters Max Vision Pinlock Easy to use interior sun visor Visor geometries are carefully studied and designed through advanced optical software. The visor has a variable thickness in order to obtain the optical class 1, the best performance achievable for a lens Visor is treated with the most performing anti-fog processes to guarantee the best performance even in the most critical conditions Visor is treated with the most performing anti-scratch processes which effectively protect the surface The helmet has fastening and rotation system that allows to remove the visor without using tools This helmet comes standard with a clear visor.
Aerodynamic The shell shapes and related aerodynamic spoilers are optimized due to intensive sessions in the wind tunnel. Aerodynamic performances allow the best comfort at all speed. removable and washable The interiors and interior comfort pads are removable, washable and replaceable, with different thicknesses to ensure the full customisation of the helmet. Retention system The retention system has a micrometric buckle made of metal and acetal resin.

Der adidas Climacool Training 3S Padded Bra Women mit ClimaCool® für optimales Feuchtigkeitsmanagement bietet zuverlässigen Halt bei hoher Belastung. Die überkreuzten Träger am Rücken sorgen für viel Bewegunsfreiheit. Damit macht das Training noch mehr Spaß. Support bei hoher Belastung!Eigenschaften: Material: 86% Nylon / 14% Elastan ClimaCool® - Wärme- und Feuchtigkeitsmanagement durch Ventilation: Dieses Material bietet Ventilation für Deinen Körper sowie Feuchtigkeitstransport und sorgt damit für optimalen Komfort und herausragende Leistung Rückseite aus Mesh für mehr Tragekomfort  Support bei hoher Belastung mit hoher Stützkraft Dehnbar: Dadurch sitzt der Sport-BH ideal am Körper Überkreuzter Racerback mit Ausschnitt über dem Rückenverschluss 3 Streifen auf vorne angenäht adidas Logo links auf der Brust gedruckt