Features 3 seasons gloves made out of soft / mild leather. Also suitable as a casual winter glove Equipped with a wind, waterproof and breathable Hipora membrane. Fleece lining
Kurzinfo: Brodit Active holder for fixed installation - Fahrzeughalterung/Ladegerät - Schwarz - für Samsung Galaxy Xcover 4 Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 513958 EAN/UPC 7320285139589 Produktbeschreibung: Brodit Active holder for fixed installation - Fahrzeughalterung/Ladegerät Produkttyp Fahrzeughalterung/Ladegerät Vorgesehen für Handy Geeignet für Installation Auto Paketinhalt Molex adapter system, Fahrzeughalterung/Ladegerät Produktmaterial ABS/Acetal Plastik Abmessungen (Breite x Tiefe x Höhe) 7.9 cm x 5 cm x 10.2 cm Gewicht 198 g Entwickelt für Samsung Galaxy Xcover 4 Ausführliche Details Allgemein Produkttyp Fahrzeughalterung/Ladegerät Vorgesehen für Handy Geeignet für Installation Auto Anpassungen Neigung, schwenken Paketinhalt Molex adapter system, Fahrzeughalterung/Ladegerät Produktmaterial ABS/Acetal Plastik Breite 7.9 cm Tiefe 5 cm Höhe 10.2 cm Gewicht 198 g Farbe Schwarz Verschiedenes Kennzeichnung RoHS Platzierung/Befestigung ProClip Befestigungsplattform
Beschreibung Snooper Tyre Pilot S6800 PKW Reduzierter Kraftstoffverbrauch um bis zu 10% Reduzierter Reifenverschleiß und Verlängerung der Reifenlebensdauer um bis zu 35% Gesteigerte Verkehrssicherheit Geringeres Unfallrisiko Minimierung des Risikos einer Frachbeschädigung Zeiteinsparung da manuelle Reifendrucküberprüfung entfällt Zeit und Geldeinsparung durch weniger Reifenservicebesuche Achsweise Einstellung der Druckwarnung Sensorbatterien können getauscht werden Zuverlässige Verwendung bei jedem Wetter Übermittlung der Messergebnisse alle 5 Minuten Batteriesparmodus wenn sich Fahrzeug 10 Minuten nicht bewegt Ökonomisch und sicher Ein korrekter Reifendruck sorgt für ein optimales Handling des Fahrzeugs und einen kürzeren Bremsweg und trägt somit maßgeblich zur Verkehrssicherheit des Fahrzeugs bei. Der Verbrauch und der Reifenverschleiß werden so gering wie möglich gehalten und somit die Umwelt und der Geldbeutel geschont. Ausstattung: Einfach via Bluetooth über das Tyre Pilot Display
Specification:Weight: 1146gModel: PV-001Material: Pure CopperMax. pressure: 3000PSI / 200bar(cant exceed)Medium Pressure Pipe Interface Model: 3/8-24UNFOxygen Cylinder Interface Model: M18x1.5Medium Pressure Air Hose Length: Approx.71.2cm/28.03First Level Pressure Reducing Valve Height: Approx.9.7cm/3.81Second Level Breathing Valve Height: Approx.9.7cm/3.81Box Size: Approx.33*15.7*10.4cm/15.03*6.92*2.67Application:1L oxygen cylinder(Not included) + medium pressure tube + secondary breathing valveFeatures:Compact portable lightweight ,easy to use.Made of pure copper material ,surface plating,hard and corrosion resistant.The pressure gauge has a luminous function, and the underwater 80m is still very clear.The dial design is clearly visible, and the pressure value is accurately identified at a glance.When you bite the Mouthpiece and prepare to inhale, you can gently press the top pressure relief valve to release the pressure drain water.Warning:Do not use this article before reading and understanding the instructions and notes.1. This product is suitable for recreational diving within 10m. Do not attempt to use it as an air supply in deep water.2. This product can be used as a backup air source for recreational diving within 30 meters.3. This product is suitable for waters above 10℃ Celsius.4.Inflate the product before use and check for damage or leakage. Never use items that are damaged, leaking or showing signs of performance error.5. The maximum filling pressure of this prod
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
