Lenz Compression 1.0 Chaussettes Blanc XL

The latest innovative GAERNE GX1 ENTRY-LEVEL boots for motocross and offroad combines technology with style and offers maximum safety with optimal comfort. The GAERNE GX1 boot is made with special high-quality materials. The new DUAL-TECH ANKLE SYSTEM is unique in this price range and has been completely integrated into the design. This technology provides stability and flexibility and thus prevents over-extension of the foot during back and forth movement as well as twisting. Taking advantage of the technology developed for the high-end SG12, SG10 and Fastback boots, the GX1 combines strong protection features with high levels of comfort. The concept with the 4 interchangeable aluminum buckles provide for a simple, fast and accurate closure. By adjusting the upper two buckles, the calf width can be regulated, thus also space for a knee orthosis. At the presentation to the trade press, this boot was priced VERY GOOD. Features
High-quality, durable cowhide with plastic protectors DUAL-TECH ANKLE SYSTEM for more safety and flexibility Adjustable calf width by displacing the top two buckles Shin and knuckle protection highly comfortable fit Shaft height about 36 cm Microfiber lining with ergonomically shaped inner padding 4 wide aluminum buckles, adjustable and easily replaceable Suede grip guard and heat protection Switch reinforcement made of sturdy plastic anatomically shaped, replaceable footbed The replaceable sole has a steel core and is oil and gasoline resistant the toe is protected by a steel toe with grippy and stable double-stitched GAERNE MX-OFFROAD-GOODYEAR sole

Specification:Handle Material: AlloyWrench Shaft Length : Approx. 14.6cm/ 5.7Chain Total Length: Approx. 44.5cm/ 17.5Max Usable Chain Length: Approx. 38.5cmFitment:For removing all oil filters up to 12cm diameterHow To Use:The chain is simply located around the filter and turned the chain will tighten to the diameter of the filterPackage Included:1 X Oil Filter Wrench

AUSTINBEM Fashion Beach Swimming Hot Spring Boxers Front Zipper Pocket Beach Shorts for Men

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Material:
Fiberglass
Features:
contain anti-scratch visor included antiturbulenter double neck protection Micrometric helmet lock high-quality multi-layer coating with UV protection quality interior Sanitized® treated Glasses loop back ECE 22 05 Weight: 900g + /-50g

Safety
Prepared for back protector Lev. 1 Warrior Protectors EN 1621-1 Level 1 on shoulders and ellbows
Comfort
50% waterproof garment prepared for thermo lining L30 prepared for H2Out lining X47 elastic knitted cuff
Performance
Step-in Clothing: layered clothing system optional
Materials
sheep leather, 0.7/0.9 mm thick, extra comfort leather
Maintenance
Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring