ABUS 200 Series hasp and staple with an all steel construction with hidden screws for basic security. Corrosion protected. Where to use it: Designed for doors closing flush, i.e. door leaf and door frame are level.Length: 115mm.Width: 39mm.Shackle Bore: 13.5mm.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
The Monument Air Bag Stopper is a durable, quality flexible air bag stopper for the plugging of drains and pipes. This bag is made with a durable nylon outer casing that gives the air bag a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure. Inflate with a MON1308 pump.
The Arctic Access Panel Range offers a simple, low cost, high quality solution to provide protected openings in ceilings and walls for access to building engineering services. The injection molded slim profile produces a lightweight solution, enabling an easy fit installation into all types of wall or ceiling construction. Made from UV stable ABS and held closed by a snap friction catch. They can be over-painted to match the surrounding surface. Can be fastened easily into position with a suitable glue.
Has a long lifetime thanks to high-quality components made of aluminium and steel. Optimum handling, due to the ergonomic handles with softgrip and low centre of gravity for optimum handling. Anti-slip surface prevents the tool from falling over. Specification Toolholder: 28mm Internal Hexagon.Input Power: 2,000 Watt.Impact Rate: 1,000/bpm.Impact Energy: 69 Joules.Weight: 29.5kg. Noise/Vibration Information Measured values determined according to EN 60745. Total vibration values (vector sum of three directions). Vibration level (chiselling) : 8.0 m/s².Vibration level (drilling/chiselling) : 8.0 m/s².
The Raaco CarryLite 55 5x10-25/2 is a durable and functional 55mm deep assorter case with a polypropylene base and polycarbonate lid, it contains 25 different size removable inserts. The transparent lid allows contents to be easily identified and is equipped with a U-profile design to stop items moving in transit. Removable Insert Sizes: 10 x A9-1 (47 x 39 x 55mm), 10 x A8-1 (47 x 55 x 79mm), 5 x A7-1 (47 x 79 x 109mm). Comes with a 10 year guarantee.
