Dainese Spine, protector vest

BROOKS FLYERBROOKS - 140 YEARS OF CRAFTSMANSHIP. The undoubted supremacy of Brooks saddles is largely due to their irreproachable quality in every detail. The leather is absolutely the best obtainable and is thoroughly adapted for its purpose. Retention of shape, and even improvement after the break-in period, is the crucial test of a leather top and is one of the chief characteristics of Brooks saddles. A broken-in Brooks is the only saddle whose shape becomes truely yours. An important feature of leather is its porosity. Invisible pores in the hide provide natural ventilation. Brooks saddles are always cool to ride, so they stay comfortable on the longest rides on the warmest days.

All the jerseys are the same as those selling in official sales,Antiwrinkle, anti - static, can absorb sweat, anti - odor, anti - shrinkage water

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

Active T5 Plus+ est une formule minceur unique qui augmente l'energie du corps et aide a bruler les graisses en stimulant le metabolisme x3

Outer Shell
Softshell
Membrane
Waterproof Membrane
Thermoregulation
Removable Downjacket Lining
Safety
Adjustable Elbow Protectors Omega Shoulder Protectors Omega Pocket For Back Protector
Comfort
Body Fit Ads Ventilation System Outside Pockets X2 Anti-Beat System Sleeves Reflective Element Removable Hood Wallet Pocket Inside Pockets X2 Zipped Cuff Fastening Trouser Connection Loops Fixed Mesh Lining

Acerbis neoprene fork gaiter material
neoprene
dimensions
length: 365mm diameter: 40-50mm