Yale Locks YE1 Brass Padlock 50mm

The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 50 mmOverall height: 77 mmOverall depth: 18 mm Shackle width: 28 mm I.D.Shckle height: 29 mmShackle Dia: 8 mm

Dense foam roller refills for use with gloss and emulsion paints on smooth surfaces for a fine finish. For use with both mini rollers and radiator rollers.The FAIRMINI2F Mini Roller Refills have the following specifications: Pack quantity: 2. Size : 100 mm (4inch).

Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 75mm.Pack quantity: 50.

Comes with a dust blower, which clears dust and debris from the cut line. The efficient dust extraction port minimises airborne dust particles when connected to a dust extraction unit. The circular saw has direct compatibility with the DEWALT AirLock system for easy, secure connection to extraction hose.

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)

The Thor hardwood mallets have a laminated cylindrical compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. The mallets have a conical self-locking handle and come in 3 different weights. These have an excellent resistance to impact and will give a long service life, they are suitable for hot work applications. Typical uses for these mallets include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.Weight: 750g (1 3/4lb).Diameter: 67 mm (2 3/4in).